Quick Question!

Have you ever purchased from PartSelect.com before?

340509-1-S-Whirlpool-326795            -Broil Element
340509-1-S-Whirlpool-326795            -Broil Element 340509-2-S-Whirlpool-326795            -Broil Element 340509-3-S-Whirlpool-326795            -Broil Element http://www.partselect.com/Schematics/Whirlpool/OSS4WXNA.gif

Broil Element

PartSelect Number PS340509

This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This broil element is located on the inner upper wall of your oven. Be sure your element wires do not fall through the wall of your oven when you uninstall the existing part. The wires are short and will make your repair more difficult because they are difficult to retrieve.

This part works with the following brands: Whirlpool, Roper, Kenmore.

This part works with the following products: Range, Cooktop, Wall Oven, Microwave, Microwave Oven Combo.

Compare At

$70.75

You Save

$11.79

Your Price

$58.96
Get this part fast. Average delivery time via standard shipping: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.7 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: Less than 15 mins
Tools: Screw drivers
Customer: John from Houston, TX

The bake element was arcing/smoking and needed immediate replacement.

I removed (2) mounting screws from the back of the oven and pulled the element out far enough to access the terminal lugs. I unplugged the old element and plugged in the new element. I also replaced the old mounting screws w/new hardware and replaced one of the terminal lugs on a damaged wire. I went ahead and replaced the broiler element at the same time (also only 2 screws on the top of the oven) although there was no indication of a problem. The process was very easy although I caution non-electrically skilled people to insure the power is off at the breaker panel when performing this work and, if the electrical wires are damaged, seek qualified assistance to repair them.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

4 of 8 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Screw drivers
Customer: Larry from Vernon, UT

Window frame --broken, would not heat.

Replaced bake and broil Elements. Replaced broken window frame, anr replaced all control knobs.The only tool I needed was a Philips Screwdriver.

Help other customers find the most helpful instructions.

Were these instructions helpful?   

1-2 of 2