340505-1-M-Whirlpool-326791-Bake-Element-240V-2100W.jpg
340505-1-S-Whirlpool-326791-Bake-Element-240V-2100W.jpg 340505-2-S-Whirlpool-326791-Bake-Element-240V-2100W.jpg 340505-3-S-Whirlpool-326791-Bake-Element-240V-2100W.jpg

Bake Element - 240V 2100W

PartSelect Number PS340505

This bake element is a partially open tapered style with push on wire terminals.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little or no heat when baking.
  • Cooktop element not heating.
  • Oven not heating evenly.
  • Compare At

    $44.59
  • You Save

    $7.43
  • Your Price

    $37.16
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.4 / 5.0, 34 reviews What's this?
 

1 of 2 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLana from Colorado City TX

Baking element burned out

Took two screws out of burned out unit. Pulled element forward and pulled off connectors. Replaced new element on connectors and screwed back in. Extremely simple. Less than 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers

CustomerCarole from Chatsworth CA

Heard a crackling and popping noise when I turned on the oven

After figuring I'd have to buy a new oven, I figured out that it was the lower baking element. When I received the new part, I removed the two screws holding the element on. Gently pulled the element off the back oven wall and removed the wire connectors. Put the new element in place - rehooked the wire connectors and it works like new. The light bulb replacement was as simple as screwing in the new light bulb. Thanks, saved me alot of money.....

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRobert from Highlands TX

No heat in oven bake mode

I tokk two srews out, pulled element out, disconnected wires, put wires on new element, put screws back in, turned the breaker back on , now oven heats up fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoseph from Aledo IL

Oven wouldn't heat

Really easy repair. Take two screws out, unplug two wires. remove old element, reverse steps with new element. Part arrived in two days, it was the best price I found also.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoett from Lake City FL

Bake element did nothing

Thanksgiving one week away oven broke. I ordered parts on line and was ready to cook our turkey. Ordering on-line saved my Thanksgiving!
We were so happy

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJohn from MUNFORD TN

Old bake element gave little heat

The part came as promised & and it was exactly the right part! I turned off the breaker to the oven (the oven has a clock and timer on it too). Unscrewed the 2 screws with a Phillips screw-driver and carefully removed the old part - being very careful to be safe and not make a big mess. It was easy to disconnect the wires and get the old element out. Then connected the wires to the new element, placed into position, screwed in the 2 screws, and turned on the breaker. It worked great. Then set the clock because it was 13 minutes slow!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBill from Quinlan TX

Element burned up

unscrewed two screws, unpluged two wires, put screws back. turn off power!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKay from Cottage Grove MN

Heating element burned out and cracked

Removed two screws, removed two clips, removed the element and rehooked the two clips and screwed the two clips back in. Zip Zip.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerGlenn from Eufaula OK

Inoperative heating element

Opened circuit breaker, unscrewed old element, disconnected old heating element wire, attached new element wire, screwed new element into place, closed circuit breaker. tested element for heat.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTom from Alexandria VA

Element burned out

Phillips screw driver to remove old element. Unhooked two leads. Reversed procedure to install new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerTerrence from New Cumberland PA

Baking element not heating

Replaced element.
Looks like I saved at least 500$
Geuss I'm Winning!
:)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerGARY from HARRISBURG IL

Bake element

Piece of cake. Removed door and racks, screwdriver to remove element. Reversed operation and back in service in no time. Good as new. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerjames from Paoli OK

The bottom heating element in our oven stopped heating

Unscrewed two small screws and took the old element out, and installed new element. It took less than ten minutes to repair. The new element works beautifully.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customerpauline from newport news VA

Oven would't heat

First removed the two screws that hold the element in place. I then pulled the element out about 3 inches and disconnected the two wires...then replaced the old element with the new element..........(worked perfectly)

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Bake Element - 240V 2100W

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Pliers

CustomerRoger from Midland TX

Bae element burned out after 22 years.

Easiest repair I have ever done.
Removed two screws and pulled element out, exposing wiring. Pulled wiring connection apart with pliers. Attached wiring to new element and inserted element back in place and replaced screws. All done!!!
It worked.

Help other customers find the most helpful instructions.

Were these instructions helpful?