| |
7 of 9 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerRobert from Deming WA
Accidently allowed the oven door to close without slowing it down. Result was a fractured inner door glass.
Removed the door just like you would do when cleaning the oven; I placed the door on a blanket on the kitchen table and carefully disassembled the door. There were more parts than I expected so keeping track of where everything went was important. I might add that without the use of my cordless variable speed drill motor removal of some of the screws would have been difficult. Adding the weight of the drill motor with sufficient push power I was able to tap the switch which "snapped" the screw loose. Don't think I could have done it with a hand type screw driver without stripping the head. Knowing your tools is very important.
|
3 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerDavid from Westminster CO
Fiber gasket around pyrex light lens was mis-shaped
All I had to do was unscrew the pyrex lens over the oven light and then remove the old gasket and replace it with the new one. Worked like a champ!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver, Screw drivers
CustomerLOUIS from FREEPORT TX
Oven light would not work, old bulb broken
HAD ALREADY REMOVED BACK COVERS AND DISCONNTEDTED POWER. WHEN IO RECEIVED PARTS I REPLACED THEM IN REVERSE ODER I HAD REMOVED THEM. TOOK ME LONGER TO REPLACE BACK COVERS BECAUSE OF MY BAD DIABETIC HANDS. THANKS VERY MUCH, YOPU SAVBED ME A BUNCH. GOD BLESS YOU AND YOURS, GOD BLESS AMERICA.
|