336509-1-S-Whirlpool-313646            -Stir Blade Drive Belt
336509-1-S-Whirlpool-313646            -Stir Blade Drive Belt 336509-2-S-Whirlpool-313646            -Stir Blade Drive Belt

Stir Blade Drive Belt

PartSelect Number PS336509

This part connects the stir blade to the fan motor.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $33.40
  • You Save

    $5.57
  • Your Price

    $27.83
In Stock
Order within the next 1 hr and 36 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.5 / 5.0, 2 reviews What's this?
1-2 of 2
 

4 of 5 people found this instruction helpful

Parts Used

  • Stir Blade Drive Belt

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsNutdriver

CustomerHarold from Foxfield CO

Broken belt on wave disperser

The microwave is the upper unit of combination microwave & conventional oven. Disconnect power to the unit. Slide unit out of built-in cabinet to expose the top shield of the microwave. Remove 5 screws holding top cover in place. Remove cover, which exposes the belt reel and drive motor. Install the new belt by threading it on the drive motor pulley, then walk the new belt on the stirrer pulley. Replace the top cover and reinstall the 5 screws. Reinstall the combination unit in the wall cabinet. Reconnect electrical power. Task Complete. The belt just seem to die of old age about every seven year. Without the wave disperser operating, the microwave oven does not give even heating.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 6 people found this instruction helpful

Parts Used

  • Stir Blade Drive Belt

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerWendell from Hot Springs Village AR

Broken belt on wave disperser

This microwave is the upper unit in combination with an oven. Microwave portion is Model RM288PXS. Cut power at breaker box. Remove metal frame around 2 sides and top, (5 screws). Remove 4 screws on bottom, whicn anchors the unit to the frame.Remove contol panel (2 screws at top) and swing down. Pull out female electrical socket at bottom right back in conrol unit space. Now pull out microwave from frame about 6-8 inches. This provides access to pulleys on the motor and wave disperser. Put on belt. Reverse the above procedure to finalize the repair. This is the 3rd time I have had to replace this belt. They last about 6-7 years. Without the wave disperser , the microwave does not provide even heat.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2