BBB A-Plus
335890-1-M-Whirlpool-308180-Bake-Element-2600W-240V.jpg
335890-1-S-Whirlpool-308180-Bake-Element-2600W-240V.jpg 335890-2-S-Whirlpool-308180-Bake-Element-2600W-240V.jpg

Bake Element - 2600W 240V

PartSelect Number PS335890

This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Little or no heat when baking
  • Cooktop element not heating
  • Oven not heating evenly
  • Oven is too hot
  • Will not start
In Stock

  • Compare At

    $49.60

  • You Save

    $8.27

  • Your Price

    $41.33
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 ... 5 6 7 8 9 10 NEXT > 76-90 of 137

 

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Louisville KY

Baking element stopped working

i received the part via fed-x i opened the box uninstalled the old part installed the new part turned it on the element got red hot and it works just fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerThomas from Black Mtn. NC

Bake element caught fire and burned into

turned power off Unscrewed 2 screws pulled old element out slightly . disconected wires . connected wires to new element tightened 2 screws turned power back on baked a pie. took longer to type this

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMark from Natchez MS

Bake element blew

remove all element that is held with two screws and install the new one. easy fix! and a lot cheaper than a new stove!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerConstance from Oconomowoc WI

Lower oven bake element didn't work

Unscrewed two screws, pulled the element out of the socket, pushed in replacement element, screwed in the two screws--done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyVery Difficult

Time to do repair:More than 2 hours

ToolsScrew drivers

CustomerKatherine from Hudson FL

Can't get the screws loosened in my oven...

I still haven't replaced this part I can't seem to get the screws out in the back of the oven to replace the element. I think I will have to call a service man to get the screws out and replace the element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers, Socket set

CustomerLinda from Birmingham AL

Broken bake element

Fairly easy to do. Part arrived very quickly. Appreciate

associate's help in making sure part was right.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBrent from Lodi WI

Oven not heating up

I removed the two screws for the bake element, diconnected the two wires attached to the bake element. I then reattached the wires to the new bake element, secured it with the two screws and I was done. It took five minutes and the oven works like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerPaula from Harrison Township MI

Bake element was cracked in half

Pulled old one out, installed new one with a twist of the screw driver. Easy!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJames from North Kingstown RI

The bottom heating element burned out

The repair was easy. I turned off the power to the oven at he curcuit breaker. Using a phillips screwdriver, I removed the 2 screws that held on the old heating element. One screw came off easily. The other screw required a little WD-40 and alot of force, but I was able to get it off. I then removed the 2 wires from the terminals on the old element. Again, it required a little force and wiggling of the contact.

Reversing the process, I slid the contacts onto the terminals of the new heating element. Then, I screwed the backplate of the new heating element in place at the back of the oven with the 2 screws I had previously removed. I then restored power at the circuit breaker. The whole job took less then 10 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHarry from Kannapolis NC

Old bake element burned out

removed old bake element (remove two screws, disconnect two wires. install new element connect wires, replace screws to hold in place. turn on oven to be sure it works.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerella from Lithia Springs GA

Broiler and baking element burned out

I'll tell you.......PartSelect said the items would take from 3-5 days.....I got them in 48 hrs. I turned the breaker to the oven off. I unscrewd two screws from the back of the oven and pulled the element out and took it off of two connectors. Repeated the same with the broiler element. Job done saved $200.00...Job was quoted at $259.00

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerBrenda from Charlotte MI

Heating element quit heating

un plugged oven from wall Unscrewed 2 screws pulled out old heating element and plugged in new heating element then plugged stove back in

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerLatrecia from Antioch TN

Bake element caught on fire & broke into 2 pieces.

Shut power off to stove, by turning off breaker. Using a screw driver, removed the 2 screws securing broken bake element to back of oven wall. Grasp the 2 wires holding the prones & gentley removed broken element. Attached new bake element to wires, put screws back in & secured to oven wall, turned breaker to stove back on. Oven works great, had pizza for dinner.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerNorman L. from Austin TX

Bake element did not heat to temp selected

removed the old one replaced the new one every thing works like new. THANKS

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Bake Element - 2600W 240V

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerKathleen from Ardmore PA

Old element burned out

Removed the two sheet metal screws holding the element, Unplugged the contacts and plugged and fastened the new element.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 ... 5 6 7 8 9 10 NEXT > 76-90 of 137