14 of 18 people found this instruction helpful
Level of DifficultyEasy
Time to do repair:15 - 30 mins
Customeraaron from peoria AZ
Washer shakes violently on spin cycle
Remove the washing machine cabinet. Use a large flat head screwdriver to pry/wedge the tub suspension apart and gain access to the pad locations one at a time. My old pads were completely gone, so there was no need to remove them. Clip the new pads into place and re-install the cabinet.
This completely solved the violent chaking problem. There was no need to replace springs.
10 of 17 people found this instruction helpful
Level of DifficultyA Bit Difficult
Time to do repair:1- 2 hours
ToolsScrew drivers, Socket set, Wrench(Adjustable)
CustomerJames M from Elkhart IN
Unbalanced and walk across the floor on spin cycle
Part Select provided the problem determination information and the video on how to install the replacement parts. I ran into one problem, I could not remove the lock nut to remove the inter and outer tub. I should have bought the special wrench for $14, no local DYI or hardware store had the wrench. So, after examination I used a large screwdriver and wood block to lift the tubs up just enough to remove the old pads and replace with the new. The old pads showed only a wear, but was enough to spin the tubs off balance. The new tabs made the washing machine work like new. New washer $500, repair man $150, parts and information from Part Select $20 bucks, priceless.