| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
CustomerDonald from Atoka TN
Door switch was broken, dryer would not get hot
if you follow the video instructions - you can't fail - the whole process went like clockwork - great help -
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
Customercharles from Carrollton GA
Heating went out
Troubleshot for operation & rotation heat inop. Removed rear cover, shot pics of wiring so, no chance of miswire. Removed lower portion (2 screws) of heater assy which contained the element. Removed a sensor & installed it on the new a element assy replaced failed element ( saw broken element open circuit ) with new one re-connected wiring. Good to go.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerAndrea from Laurel MD
My dryer did not heat
I replaced the parts as recommended by the website.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerCher from Brandon FL
Dryer not heating
The repair was easy and the directions were easy to follow as well. It saved me $250 to repair it myself! I did have to order the thermo cut off kit as well b/c the thermo cut off usually goes when the element goes too. The shipping was very fast less than 24 hrs. for min. shipping charge.I have this site booked marked!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerBarbara from COOL CA
No heat in dryer and timer not advancing
Under "Symptoms" we clicked on "Timer does not advance and no heat". We replaced one at a time the Thermal Fuse, the Cycling Thermostat and the Timer -- still no heat and timer only advanced on timed dry setting. An electrician confirmed our breakers were fine. When we replaced the heating element, the dryer worked fine and the timer advanced properly. We followed the instructional videos which were very helpful in replacing the parts using a nutdriver and screwdriver. The new heating element was needed and probably the Timer.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers, Socket set
Customersandra from clinton IA
Dry running not heating
Took back panel of dry.unplug heating element and took off safty switch,pull element off,than put safty switch back on element.slide element back in place.replace back.plug dry up,turned it on.it works.Thank you so much. s.w.clinton iowa
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Screw drivers
CustomerAmanda from Gun Barrel City TX
Dryer did not produce heat
I checked out the youtube videos on this repair...take the back cover off using nut driver, pull out the old coil, and replace. Easy as pie! Works like a charm now.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsPliers, Wrench(Adjustable)
Customerjesse from MCLEANSVILLE NC
No heat
took off back. unplugged parts just like the video replaced with new ones put back on
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsSocket set
CustomerCody from McAllen TX
Dryer fully functioning but no heat
The whole order process was awesome with your company. The parts arrived and very fast delivery. The attached videos simplified the entire process. I realized after receiving the parts that the problem was actually a burnt wire inside that I replaced myself. Since I no longer needed the ordered parts I called and had a wonderful interaction with Janet. She was very helpful with the return process. I assure you that after researching you Co. had the best price and service. I will be sure to order any part you sell in the future if needed to fix my appliances. Thank you for the videos that explain the repair, it makes the average person's job a lot easier when companies take the time to invest in their customers. 2 thumbs up!!!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers
CustomerBob from Cripple Creek CO
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerMike from Middletown DE
Heating element didn't work
Easy as 1,2,3. Everything lined-up and plugged in with out any cursing. The part fir like a glove with out modifications
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers, Wrench set
CustomerJuan from Rock Hill NY
Turning but not drying
So far I change the heating element and thermostat and is still not heating.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers
CustomerJonathan from Flagstaff AZ
Low heat from dryer
replaced both heating element and Thermal cut-off kit...figured since I had it open I would change out both items. Works great!!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers
CustomerTracy from Concord NC
Dryer would not heat
Watched video to make sure I was doing the right thing. I had never repaired anything and this was a piece of cake.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Heating Element - 240V 5600W
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver
Customermargaret l. from Thornville OH
Clothes not drying, no heat
Watched the video install instructions and followed instructions and installed the heating element. Still did not work but install was easy. So ordered the thermal fuse and installed and that didn't work. So ordered the thermal cut off kit, and the top thermal unit was installed and we had heat. All the installations were easy and did not take any time at all to do. Ordering and delivery were easy and speedy. If not for the holidays delivery would have been faster but am not complaining as each delivery arrived a lot sooner than I expected. Next time will order all the recommended parts at the same time instead of one at a time and wait and see method. The video install instructions were very helpful. Must mention I could have done the install myself the instructions were so easy (I'm 70) but my husband did the work so kudos to him.
|