Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sean
November 21, 2018
Dryer gets very hot, even on no heat cycle. Thermostat or shorted element?
For model number 11060012002
Hi Sean, thank you for your question. Looking at your model information there are a few parts that you should take out and test to see which one is giving you the issue. The first parts to check in this case would be all of your thermostats and thermal fuses. You can test those parts with a multi meter and they should be reading 0 ohms to be working correctly. If those parts are fine, you should then go on to testing your heating element as well. You can also test that with a multi meter and it should be reading between 0 - 50 ohms. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Barry
February 20, 2018
How much drying time do i get with a coin operated dryer that is electric dry.
For model number CEM2760KQ2
Hi Barry, Thank you for the question. The timer should run for 45 mins. Good luck with the repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Todd
August 16, 2017
Dryer will not shut off until door is open and will restart when door is closed, would this be the timer?
For model number RGK2951KQ2
Hello Todd, thank you for contacting us. It is possible that the door switch could be faulty. This part can cause the dryer to not turn off. Part number PS11741701 If you find out it is not the door switch then I would try replacing the timer. Hope this helps!
Was this helpful?
Thank you for voting!
Manny
February 20, 2018
How to change time on this timer
For model number Whirlpool 279737 Timer
Hi Manny,
Thank you for your question. The only way that you would be able to change the time is by turning your knob into the cycle that you want your machine to go in. You cannot change the basic functions of the timer. If your timer is not working then you may have to replace it. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
