334185-1-M-Whirlpool-279347-Dryer-Door-and-Washer-Lid-Switch-Kit.jpg
334185-1-S-Whirlpool-279347-Dryer-Door-and-Washer-Lid-Switch-Kit.jpg 334185-2-S-Whirlpool-279347-Dryer-Door-and-Washer-Lid-Switch-Kit.jpg 334185-3-S-Whirlpool-279347-Dryer-Door-and-Washer-Lid-Switch-Kit.jpg

Dryer Door and Washer Lid Switch Kit

PartSelect Number PS334185

This kit is simple on/off mechanism that prohibits the machine from operating when the door is open.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Will not start.
  • Will not drain.
  • Will not shut off.
  • Will not agitate.
  • Pumps but will not spin.
  • Timer will not advance.
  • Compare At

    $23.94
  • You Save

    $3.99
  • Your Price

    $19.95
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Dryer Door Switch Actuator Spring/Lever

Part Number 383733

This black actuator spring with white rubber tip is used for both dryer doors and washer lids.

$3.71
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.9 / 5.0, 17 reviews What's this?
16-17 of 17
 

2 of 6 people found this instruction helpful

Parts Used

  • Dryer Door and Washer Lid Switch Kit

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsPliers, Screw drivers, Socket set

CustomerAndris from Sands Point NY

Dryer would not activate

>removed 2 screws connecting the vent filter to the top lid of the unit (just in front of removable filter).
>Losing two screws at the back of the machine, just below control panel to allow free movement of the top lid on its hinges.
>Raise top lid & supported open.
>Now have free access to door switch (inside , front right fastened to front panel)
>removed the old switch
>fasten new switch (required new wire connector which was supplied with package) to existing wiring and replaced.
>Works perfectly!

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 10 people found this instruction helpful

Parts Used

  • Dryer Door and Washer Lid Switch Kit

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Screw drivers

CustomerEdward from Nanuet NY

Washer would fill with water but not start

took part top of washer saw switch replaced it not to difficult it is always easier when you have new one to look at

Help other customers find the most helpful instructions.

Were these instructions helpful?

16-17 of 17