Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS334124
With this thermostat, a dryer's heating element will cut out if the internal temperature reaches 205 degrees Fahrenheit. The element will kick back in when the temperature drops to 165 degrees Fahrenheit.
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This part fixes the following symptoms:
I unplugged the appliance and turned off the gas supply. I removed the exhaust hose by loosening the clamp with a nutdriver. I removed the back panel screws with a nutdriver and removed the panel. I pulled the wire connectors off of the thermostat and thermal fuse. I removed both parts using a screwdriver. The thermostat terminals were slightly different, but the new style terminal ends came with the thermostat. I cut the old style terminal ends off of the old wiring with wire cutters. I stripped the wires and crimped new ends on the wires. I replaced the parts and wiring in the reverse order of removal. I replaced the back panel and exhaust hose. I turned on the gas supply and plugged in the dryer. I turned the dryer on to test it. It worked well. No problem!
Help other customers find the most helpful instructions.
Were these instructions helpful?
All parts were correct is what I should say to begin. Replacing the parts was a bit difficult, but I got the job done. My Kenmore dryer has been serving our needs faithfully for 14 plus years, and hopefully with these new parts, it will last a bit longer, thanks to your service parts. Much appreciated, and keep up the good work!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.