Double Burner Plug-In Module

PartSelect Number PS333519

This is an older style cartridge and has one 8" and one 6" surface element included.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Surface Burner - 8" - 2600W

Part Number 382106

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

$25.00
In Stock

Standard Y-Frame Surface Burner - 6" - 1500W

Part Number 382104

The manufacturer suggests replacing the receptacle at the same time.

$21.82
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 1 reviews What's this?
1-1 of 1
 

1 of 2 people found this instruction helpful

Parts Used

  • Double Burner Plug-In Module

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerCarolyn from Sand Springs OK

Replace old/damaged plug-in module

I unplugged the old module and tried to plug in the new one that I ordered from you. However it would not fit in the slot. The old module had flat head screws , two on each side, and the new one had round head screws. So I took the old ones out and put them in the new unit.

The big difference is that the burner knobs on the two burners on this unit are backward. So when I turn on the front buner, the back burner gets hot. Vice Versa.

Will keep this unit, but think it will be difficult to get used to this switch. And if we sell the house, it will be have to be explained.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1