329681-1-S-Whirlpool-2196195           -Dispenser Door Pin
329681-1-S-Whirlpool-2196195           -Dispenser Door Pin 329681-2-S-Whirlpool-2196195           -Dispenser Door Pin http://www.partselect.com/Schematics/Maytag/MWAJKNP1.gif

Dispenser Door Pin

PartSelect Number PS329681

This dispenser door pin comes with the washer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Ice maker won’t dispense ice.
  • Leaking.
  • Compare At

    $7.91
  • You Save

    $1.32
  • Your Price

    $6.59
Special Order
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Torsion Spring

Part Number 2352407

Found in the dispenser section of your appliance. Can also be found in the ice door kit.

$27.02
Special Order

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.3 / 5.0, 2 reviews What's this?
1-2 of 2
 

353 of 415 people found this instruction helpful

Parts Used:
Level of Difficulty: Really Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver, Pliers
Customer: BILL from BATESVILLE, MS

Front door ice wouldn't work and air going into freezer

Thanks to the pictorial diagram, I was able to order correct parts. It was just a matter of removal of broken parts and replacing them. Ice maker now working and air is no longer getting into freezer which was freezing up ice maker. Thanks for timely delivery, now I am able to use ice dispenser, which I haven't used for long time. Thanks

Help other customers find the most helpful instructions.

Were these instructions helpful?

16 of 45 people found this instruction helpful

Parts Used:
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: Hoyt A Sulvin Sr from Irwindale, CA

Ice make would not dispense out the front door.

Unpluged the unit and removed the front trim ring.
removed the old parts and installed the new parts.
in reverse order. it took about 12 hour but the dispenser to work but seems to work fine now.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2