BBB A-Plus
329648-1-M-Whirlpool-2196100-Shelf-Retainer-End-Cap.jpg
329648-1-S-Whirlpool-2196100-Shelf-Retainer-End-Cap.jpg 329648-2-S-Whirlpool-2196100-Shelf-Retainer-End-Cap.jpg 329648-3-S-Whirlpool-2196100-Shelf-Retainer-End-Cap.jpg

Shelf Retainer End Cap

PartSelect Number PS329648

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

In Stock

  • Compare At

    $3.20

  • You Save

    $.53

  • Your Price

    $2.67
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-6 of 6

 

2 of 3 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

Tools

CustomerJohn from VAN NUYS CA

3 shelf retainers in freezer broke off over time

snapped the new shelf retainer end caps onto one new trim-door and 2 old ones and snapped all 3 back onto the freezer door above each shelf so I can now use 3 freezer shelves

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerBonny from Akron OH

Pieces were broken making the shelves unuseable.

Took the old shelf and removed the endcaps and snapped the new ones on.

The support stud kit could have had better directions. Was unsure if the whole piece came out of the wall of the freezer or not. A little confusing.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSteven from Flemington NJ

End cap clips that attach to refridgerator frame broke off from wear and tearkid use

I uncliped the old broken peices and snapped the new ones in its place. easy as 1 2 3.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerAnn from Elmira NY

The end caps on the refrigerator and freezer shelves broke.

I just popped off the broken end caps and put the new end caps on. Very easy and new parts fit perfectly and work well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

    • Shelf Retainer End Cap

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerSonia from Newark DE

Refrigerator door and freezer door end caps ripped out by careless people.

Snapped the end caps in in seconds. Thanks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerThomas from Lomita CA

End caps on door shelf retainers break if barely touched

I removed the broken end caps (and bungee cord in one place) and replaced them with the new pieces, which then snapped into holes in the door.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-6 of 6