BBB A-Plus

Water Filter Housing

PartSelect Number PS328166

The filter is NOT included with this part. This part has a 1/4" and a 5/16" push on fittings - that way, you can push in the water lines for easy installation.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Leaking water
In Stock

  • Compare At

    $61.33

  • You Save

    $10.22

  • Your Price

    $51.11
Fast Shipping

Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos

For installing this part.

Related Parts

Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Water Filter Outlet Tube Kit

Part Number 731462

$32.47
  In Stock

Filter Inlet Water Tube

Part Number 886401

As per the manufacturer, this part starts out as 1/4" tubing but ends up at 5/16".
$33.02
  In Stock

Installation Instructions

Provided by PartSelect customers like you.

< PREVIOUS 1 NEXT > 1-4 of 4

 

37 of 54 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsNutdriver, Wrench(Adjustable)

CustomerGeorge from Hernando MS

Pur water filter ruptured could not remove from housing

Removed two screws holding the filter housing. Pulled filter and housing out far enough to remove inlet and outlet lines.Replaced inlet and outlet lines( precautionary) in filter housing, installed new filter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

12 of 17 people found this instruction helpful

Parts Used

    • Water Filter Housing

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsWrench(Adjustable)

CustomerWilliam from Waxhaw NC

Water filter end broke off so I could not get out of housing.

Removed 2 screws holding housing to frame. Pulled housing out 10 inches. Removed water lines. Attached water lines to new housing. Pushed back into place. Secured to frame with 2 screws. Put in new filter. DONE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

11 of 17 people found this instruction helpful

Parts Used

    • Water Filter Housing

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers, Wrench set

CustomerJohn from Vernon CT

Filter housing unit leaking

It was simply a matter of removing the old filter housing unit by unscrewing 3 screws and unplugging the two water tubes. After re-insterting the water tubing and securing the housing unit "VOILA" good as new..It really was easy..

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 12 people found this instruction helpful

Parts Used

    • Water Filter Housing

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsSocket set

CustomerBrian from North Augusta SC

Water leaking from inflow water tube at the water filter housing.

The CAUSE of the LEAK were the O-rings on the water filter itself. My son followed others suggestions on how to detach the water hose from the filter housing, advise was helpful. After replacing the water filter housing, helpful, and inflow water tube the leak was still there. So my son then inspected the water filter and replaced. Water filter light was still green so we did not think it needed attention.

Help other customers find the most helpful instructions.

Were these instructions helpful?

< PREVIOUS 1 NEXT > 1-4 of 4