327641-1-M-Whirlpool-2182179-Lower-Door-Closing-Cam.jpg
327641-1-S-Whirlpool-2182179-Lower-Door-Closing-Cam.jpg 327641-2-S-Whirlpool-2182179-Lower-Door-Closing-Cam.jpg 327641-3-S-Whirlpool-2182179-Lower-Door-Closing-Cam.jpg

Lower Door Closing Cam

PartSelect Number PS327641

This door closing cam is located on the bottom of the fridge/freezer.

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Fridge section too warm.
  • Clicking sound.
  • Door sweats inside or outside.
  • Unusual Noise.
  • Compare At

    $4.75
  • You Save

    $.79
  • Your Price

    $3.96
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Door Cam

Part Number 4082687

$4.11
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 35 reviews What's this?
31-35 of 35
 

1 of 2 people found this instruction helpful

Parts Used

  • Lower Door Closing Cam

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

CustomerJohn E. from Lavonia MI

Fridge door friction / not swinging shut

Removed the door, laid the door on its side, and pulled the worn part from the door. Inserted the new part, reattached the door, and it works like a charm. The parts diagram online was very helpful. I ended up purchasing a part I didn't need in case an unidentified washer came with it, but I didn't need it. No big deal.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsSocket set

CustomerAdam J from Annapolis MD

Fridge door wouldn't stay closed

Removed the door with Socket set & removed the lower door closing cam, replaced it with the new one and reattached the door. Biggest part of the problem was diagnosing the part needed. I replaced the filter while I was at it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsNutdriver

Customermichael from Westchester IL

Dor would not close by it,s self

supported door with blocking and removed lower
arm and cam. Replace cam and re installed arm.
removed blocking from door and tested completed installtion of cam. all went well.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver, Socket set

CustomerDavid W from yoakum TX

Door would not close

i blocked up door took brakets off replaced plastic cams put back together door works like new one

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsNutdriver

CustomerRick from Johnston IA

Door would not close on its own...had to give it a little extra shove

Took off the top cap, undid the 3 screws holding the top door bracket on, took off the door, repshove the lower door closing cam pieces, and then put the door back on...piece of cake, dude.

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-35 of 35