| |
3 of 7 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerSerge from San Jose CA
Water and ice dispensers were old with hard water
Some screw not easily accessible. I broke the ice dispenser mechanism but could glue it back so everything fine for now.
|
3 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerJames from El Paso TX
Crisper drawer was broken. Other parts were stained due to hard water.
All the parts were easy to find on the website and they arrived within a few days.
Only needed a screw driver to remove the old water arm dispenser and to install the new one.
The drawer, the ice guide and the grille/tray all snapped in place.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJeffrey from Rochester NY
Crisper drawer and ice guide were broken
The drawer just slid out and the new one slid right in. The ice guide popped out and the new one simply snapped right in. Thanks PartSelect.com!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:30 - 60 mins
Tools
CustomerNikki from Champlin MN
Middle tab broke off
I haven't quite figured out how to get this completely installed. I'm having trouble getting the middle tab to insert. But I do have it working for now until I can have someone else look at it for me. I'm just happy I was able to find the part!
|
1 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsNutdriver, Pliers, Screw drivers
CustomerGeorge from Anderson SC
Water desper nozzel, control bracket ice guide missing and door trim off
Popped fromt pannel off from bottom side removed 2 screws from control bracket and took switches etc. off old bracket. removed broken water tube and cut top off. Secured black tubing together and pulled down through door fastened into exixting fitting repolaced one screw. placed switches onto new control bracket and okaced back with 2 screws. Snappec ice guide in place then replaced cover into notches in top and snapped into place. incerted 2 new door handle trim clips into trim and slid into place,,,,finished
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerAlfred from Edenton NC
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerGary from Pelham AL
Bottom lug broke off
Just follow the video on the website. Great instructional video. Ordering and delivery was excellent. FedEx is my favorite delivery service. I do a lot of purchasing and Parts Select was the easiest. Website is well thought out and simple to use. Emails keep you informed of the order status.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerGeorge from North Las Vegas NV
Cover for ice maker shoot broke
watched the video and did as the video said - no problem
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMaria from Manalapan NJ
Ice guide had broken off
The new ice guide snapped easily into place with the aid of a small-sized screwdriver. Very simple to do. We watched the installation video on your website as well. Thank you!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
Tools
CustomerTERITHA from MEMPHIS TN
Crack crisp pan & ice gude broken
It was very simple, exchange the damaging parts Crisper Pan and Ice Guide.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:Less than 15 mins
Tools
CustomerJerry from Orange TX
The tip of the bottom tab was too long to fit through the slot for it.
I used a sandpaper drum on my Dremel tool and ground about a millimeter off of the bottom tab tip. That allowed me to then push it through the slot and rotate it up and closed the top clips to complete the job.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWillie from San Antonio TX
Broken ice shute
I pulled the broken shute out because one locking tab had broken. The front tab slipped out very easy. I slid the new piece into position by placing the front tab into position and press the two locking tab into place and it snapped on. Took about 3 minutes to do everything.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJames from Whitewright TX
Clip on ice guide broke and guide was loose
watched the repair video on parts selct site which confirmed my thoughts about the repair procedures. Followed the simple instructions and used a little dab of vasaline so the plastic on plastic clip slipped into place easier. Simple repair. Parts were shipped fast and cost was good. New guide was in place and working less than 1 week after I ordered the part. Great and fast shipping. Would use this site again without hesitation.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRich from Tampa FL
Ice guide broke and wanted additional storage on door
I watched the video on removing and installing ice guide. It was on point. Thanks!! It took about 1 minute to install.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTimothy from Carrollton TX
The ice guide broke - super simple to fix!
Just bust out the old part, snap in the new part. It couldn't be more simple. I wouldn't have tried it without the video. Once I did it, I decided I will always check here first!
Tim
|