Ice Grid Cutter

PartSelect Number PS326566

Manufacturer Part Number 2174861
Manufactured by Whirlpool

This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.

  • Compare At

    $272.92
  • You Save

    $45.49
  • Your Price

    $227.43
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.3 / 5.0, 4 reviews What's this?
1-4 of 4
 

3 of 4 people found this instruction helpful

Parts Used

  • Ice Grid Cutter

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsPliers

CustomerCharles from Bryant AR

Ice machine grid cutter had failed. All necessary was to pull old one and replace with new one. Hardest part was to remove the cover face plate on the front of grid cutter. The rest was a piece of cake. Now my ice machine works perfect and produces a ton of ice quickly and nicely.

I removed the two wing nut type screws and pulled grid cutter out and then disconnected both the electrical power plug and the light power plug. Then I removed the front face plate and put it on the new grid cutter after cleaning and re-inserted the new grid cutter into ice machine along with re-connecting the electrical and tighten wing screws and then turned the ice machine to on and within approx. 2-3 hours, we had ice. Very simple to do and machine works perfect now. Just like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Ice Grid Cutter

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerThomas from Warner Robins GA

Icemaker would not make ice. Diagnosed problem as being the cutter which was not cutting the ice thereby causing the machine to cycle draining the water receptacle.

Removed two thumb screws holding old cutter in place, Replaced old cutter with replacement part the same way I removed the old cutter. Problem solved.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 2 people found this instruction helpful

Parts Used

  • Ice Grid Cutter

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerCecil from Indian Wells CA

Ice wouldn't melt into the small squares

At the top of the unit is the grid-cutter, to remove, I unscrewed the two turn screws (usually can do by hand but mine were a little tight so I used pliers to turn them). I slid the unit out and disconnected the power supply and light switch. I removed the plastic cover on the front and put it on the new grid cutter, lining up the light between the plastic and the edge of the grid. Slid the cover back on and then slide the grid cutter back into place. Hand turning the two screws and it was making ice in no time.
I saved more than $200 doing it myself!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 4 people found this instruction helpful

Parts Used

  • Ice Grid Cutter

Level of DifficultyA Bit Difficult

Time to do repair:15 - 30 mins

ToolsNutdriver, Socket set

CustomerJohn from Crownsville MD

Wire in ice grid cutter broke

The repair was a breeze, but finding the part on line was very difficult. You do not list Marvel as a brand. I was told when I bought the ice maker that it was the same as Kitchen Aid only $100.00 less. NOw I need an ice retainer baffle and I cannot find that at your web site

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4