Filter Housing and Ball Assembly

PartSelect Number PS311343

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews What's this?
1-1 of 1

1 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers, Wrench set, Wrench(Adjustable)

CustomerDaniel from Houston TX

Install new l nut and filter tubde ib a reverse osmosis water filter

The filter housings (3) were all stuck on so the entire module had to be removed. The elbow fitting on the nousing cap for the RO filter became stripped and also had to be replaced. The problems were mostly due to over-tightening of the filter housings for all thre filters but also the tight quarters available to remove the tubing and get it out of the way (and also reinstalling them).

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-1 of 1