http://www.partselect.com/Schematics/GE/GE_Thumb/00005323i01.gif
See part 24 in the diagram

ELBOW 1/8 NPT X 1/4 &NUT

PartSelect Number PS311212

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $11.15
  • You Save

    $1.86
  • Your Price

    $9.29
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 2.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

2 of 4 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsPliers, Screw drivers, Wrench(Adjustable)

CustomerDavid from Garden Grove CA

The drinking water didn't go out from the faucet

first, I cut off water from water supply I take out 3 filter ,clean the sump and put 3 these sump back without filter.
I turn on water from water supply ,the water still don't go out from the faucet,I take off water hose from in line of automatic valve ,the water go out I put this hose back.Next I take off the water hose from out line of automatic valve ,the water didn't go out
--> I know the automatic valve has problem,I take off this valve ,uncrew 4 screw on this valve ,I blow in the in line connector on this valve by my mouth,the air didn't go out I know these 2 line clog from dust ,So, I have to blow these 2 line by air compressor , these line are uncloged from dust ,and the diaphragm broken too, I put the new diaphragm in, screw 4 screw in this valve and hook up water hose and this valve back in system and put 3 filter in 3 sump ,turn on water back and the system work perfect .
Note : YOU need to double check the storage tank.
Please wait 4 hrs for water fill in the tank ,put this tank to the big bucket ,take off the hose to this tank ,If water stream out fast or so fast--> this tank is good.if water didn't stream out --> this tank need to replace the new tank.
I hope you do it your self sucessesful .

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 3 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:More than 2 hours

ToolsPliers, Screw drivers, Wrench set, Wrench(Adjustable)

CustomerDaniel from Houston TX

Install new l nut and filter tubde ib a reverse osmosis water filter

The filter housings (3) were all stuck on so the entire module had to be removed. The elbow fitting on the nousing cap for the RO filter became stripped and also had to be replaced. The problems were mostly due to over-tightening of the filter housings for all thre filters but also the tight quarters available to remove the tubing and get it out of the way (and also reinstalling them).

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2