Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306944
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
Take everything out of refrigerator that sits on the drawer slides, remove screws that hold old drawer slides in place; put new drawer slide in place; then insert and tighten screws. Very quick and easy.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Received the part in a couple of days. Replaced drawer slide. Repair completed.
I removed all items on the shelf that the rail supported. I removed the crisper top and crisper. I removed the 2 screws that held the broken rail and removed the broken rail. I set the new slide rail in place and tightened the 2 srews. Then I reinstalled the crisper and crisper shelf. This was a very simple, easy repair. The most difficult part of the process was identifying the correct replacement rail online.
First i had to remove basket, and then remove the two screws in bracket, and replace with new bracket , it took me about two min. to replace.
Removed the two old screws .Installed new drawer slide.
Removed the 2 screws and put in the rail with the 2 screws. It was easy to identify the part on your web site.
removed the screw, replace the screw in new picece. Retighten srcew.
Very very simple. The rail is held in by just two screws. Remove these, remove the old rail, replace with new rail, screw it down! The hardest part is actually getting your head into the space where the drawer goes so that you can see the screws you're removing.Now, why this thing broke to begin with is a whole other story....but at least fixing it is simple.
I just screwed in the two screws and put the rail in.
... sliding all my cans and bottles into the produce bin. Amazingly, as I am a fifty-something divorcee with no mechanical skills, I was able to identify the broken part on your site. A replacement arrived promptly and fit perfectly. I fixed my own refrigerator!!!!
remove the broken rails cleaned refridg and replaced rails required 4 screws easy my only question or comment would be why are the rails so cheaply made this is the second time that i replaced them and my refridgerator is only 5 years old
The Rails were cheap and shipped very quickly. Removed food items from the shelves and drawers, then the glass plate shelves - push forward and raise from the rear edge. Verified that the rail parts were identical.There were two screws holding each rail, remove the screws, remembering to note how the rails were oriented.Cleaned all surfaces normally covered by the rails and drawers etc. using common kitchen cleaner.Used the original screws and a philips #2 to secure the new rails, making sure not to over-tighten the screws.This is an easy repair to do. Much easier than say replacing the oil filter on your car, or cleaning the filter on range hood fan.
i just removed the philip screws on the old ones and instaled the new rails.the water valve was easy with the water lines had a quick disconect on them,then used pliers to remove the rest of it.the repairs are very easy.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.