Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306944
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
1) The large drawer is first removed from the guide that remained on the side wall.2) Removal of the light shield from the rear of the glass shelf to facilitate glass shelf removal by lifting the rear edge of the glass and remove it.3) Unscrew two phillips head screws holding the remaining pieces of the plastic guide to the interior side panel of the fridge.4) Examine the replacement guide and insure that the nylon guide and stop parts are clicked into place. If unsure, look at the guide on the other side to ensure that both are present and completely seated before installation of the replacement guide. (These usually fall out of the guide during shipping and should be in the bag with the guide!)5) Once the guide is outfitted with the nylon guides, secure the new guide with the two phillips screws and DO NOT over tighten, remember you are dealing with plastic guide and steel screws going into a steel cabinet.6) Re-install the glass shelf, followed by the light shield and finally the large drawer which should slide out smoothly to the stop and back closed without any drag.7) A successful installation usually includes giving the drawer and glass shelf a good cleaning that probably could be done to the entire fridge side of the unit.
Help other customers find the most helpful instructions.
Were these instructions helpful?
The drawer slide broke and I just removed the 2 screws that were still in the side of the refrigerator. I then screwed the new drawer slide in the same holes and it was done!! Simple, simple....even for me, the housewife.... ; )
I removed the two screws from the old broken rail using a regular star screw driver and replaced the new rail you sent us. Took only 2 mints to do all.
I removed the screws and replaced the rails one at a time.
This was so easy! I got the part number off of the broken part, ordered online, and it was delivered the next day!!! So fast! Then I just unscrewed the broken part and reused the existing screws to install the new one. It took about 5 min. Thanks for making everything so fast and easy!
I removed food from shelf over crisper drawer, then removed shelf and crisper drawer, removed two phillips head screws in right side rail and replaced rail.Easy as 1-2-3
First take all your junk off the shelf (with the broken rail of course), take the glass shelf off. Remove screws (phillips). Throw away old rail. Replace new rail, tighten screws. Replace shelf, replace junk. You're done.
Removed each drawer and removed two screws for each rail. Disposed of old rails. Installed new ones using the screws removed from old rails. Put drawers back in and VOILA! Crisper drawers that work! AMEN PARTSELECT!
Simply replaced the 4 screws and slid the drawer back in place. Easy and saved a service call.
The drawer and shelf malfunctioned from day one. After being shocked by the appliance store's denial of fault and the estimate to repair I went online and Googled the model number of my refrigerator. Lucky for me I found Parts Select. I ordered the part for a tiny fraction of the repair estimate and received the part in three days. The replacement was very simple -even for a middle aged real estate attorney. I removed the drawer and glass shelf; removed two phillips head screws; lined up the new part replaced the screws slid in the drawer and sat the glass shelf in place. Looks new, works like new. Thank goodness for PartsSelect.com
I removed the top crisper drawer and the glass shelf above it. I then removed 2 screws and placed the new bracket in place and installed the 2 screws. About 5 minutes to complete.
I simply took the drawer out took the screws out holdig the two broken slides and put the two new slides back in then the drawer and now the drawer slides in and out easier than it did with the original parts
Called the local parts place, they had the rail/slider in stock, but could not figure out which door shelf I needed. I went to PartSelect and pulled up the picture, saw exactly what I needed, and ordered the parts (cheaper rail than the local parts place quoted, too!)Parts shipped that night, and 4 days later everything was fixed!
I removed the broken parts by taking out the screws that held them in place. I then screwed the new parts back in. Everything fit perfectly and the parts I ordered arrived in one day.
We were using the fridge without the drawer in for at least a year. I wasn't sure how we could get it fixed and we didn't have the money to buy a new fridge. One day I was tired of looking at our fridge without the drawer in it and I took the make/model/serial number down and Googled GE fridge parts and it brought me to your site. The site was easy to use, I found the parts I needed and my parts arrived within 2 days of ordering. That evening I brought the box of parts to my husband and said "fix the fridge... please". BAM! 15 minutes later... I have a normal working fridge again. Thank you!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.