306944-1-S-GE-WR72X240          -Drawer Slide Rail - Right Side
306944-1-S-GE-WR72X240          -Drawer Slide Rail - Right Side 306944-2-S-GE-WR72X240          -Drawer Slide Rail - Right Side 306944-3-S-GE-WR72X240          -Drawer Slide Rail - Right Side http://www.partselect.com/Schematics/GE/GE_Thumb/00120714i07.gif

Drawer Slide Rail - Right Side

PartSelect Number PS306944

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Door won’t open or close.
  • Not dispensing water.
  • Compare At

    $26.66
  • You Save

    $4.44
  • Your Price

    $22.22
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Left Side

Part Number 306943

When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.

$17.50
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.6 / 5.0, 101 reviews What's this?
 

11 of 20 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMichael from Crofton, MD

Old parts broken and or cracked so drawers didn't open easily and shelves were uneven

First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer.

The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 14 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMary from St Albans, VT

Both rails broken on right side

avoided the problem for a few months and did not want to spend alot of money for a repair man. My husband is not the repairman type (he almost broke a light ficture trying to change the bulb). I went online and wasnt sure what I should order so I finally called, spoke to a woman who was very helpful, parts came in, removed broken pieces,used a screwdriver to put it in, put the light cover on and DONE! a new fridge! most rewarding 60 bucks spent in a long time...i should do more home repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

10 of 18 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerTobi from Kansas City, MO

The drawer slide was broken and wouldn't hold the drawer up anymore.

I removed the drawer unscrewed the screws that held in the slider rail. I put the new rail in place of the old one and screwed it in. I replaced the drawer. It took a little longer because I cleaned out the fridge while I was in there. I actually had more parts than I needed, and will be returning a couple of things. It was really easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

9 of 16 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerWayne from Riverside, CA

Storage drawers slides were broken

First I removed all the broken pieces with a screwdriver. I then installed the upper drawer slides and then the lower. Put the glass in was easy. All you had to do was put it in the slots on top of the drawers. The filter of course was unscrew the old one and screw on the new one. All in all is was an easy experience. Too bad it took us over a year to order the parts.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally Easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerNicholas from Twinnsburg, OH

Right side drawer slides broken.

Total time to replace both slides was ten minutes. It took me longer to take the stuff off the shielf than it was to fix the slides!

Help other customers find the most helpful instructions.

Were these instructions helpful?