Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306944
The drawer slide rail for the right side is used for refrigerators. The drawer slide rail attaches horizontally to the refrigerator wall and supports the drawer so it can easily slide in and out. If the drawer slide track is broken, not sliding, or is not dispensing water, then changing the right side drawer can be the solution to the following problems. Make sure to unplug the refrigerator from the power source and make sure to wear gloves to protect your hands when installing. Refer to the diagram provided by the manufacturer for further guidance and instruction.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
EMPTIED SHELF , PULLED DRAWER OUT, REMOVED TWO SCREWS, PUT NEW RAIL IN PLACE, REPLACED TWO SCREWS, SHELF AND DRAWER - DONE
Help other customers find the most helpful instructions.
Were these instructions helpful?
used on line video perfect instructions
Removed the slide by removing the two screws that held it; replaced the slide and that was it.
Very simple repair. The hardest part was making sure I was ordering the correct sliders. I nailed it! I simply removed drawers and glass, removed broken sliders by unscrewing them, wiped out fridge, screwed in new sliders and replaced glass and drawers. The whole process was easy. I'm glad you were there for me!
Remove two screws holding slide raid in place.Replace slide rail with new one.Reinstall two screws.
removed 2 screws and installed new rail with 2 screws 5 min
Removed old rails & replaced with new ones. Only 4 screws. Very easy. Only problem was picture on website not clear which parts to order. Got wrong part first time, called & they ordered correct part. Arrived very quickly & got return authorization for wrong part.
This was a very easy repair. I simply removed the screws that held the drawer slide rails and trim pans, and replaced the broken parts. No sweat!
The repair took 5 minutes remove old screws wash well and screw in the two screws into new holder. Very simple all you need is a phillips screwdriver.
Very easy- just remove 2 screws and re-install using same screws and existing holes.
remove screws insert new rail
I removed the 2 screws that had held the cracked drawer slide rail. The new slide rail fit perfectly. I screwed it in using a phillips head screw driver and the drawer slid back in place. Very easy!
I used a short Phillips screwdriver to remove 2 screws that held the broken left slide rail in place. Then I screwed the new part in place. Really, really easy!
Unscrew the two screws with a screwdriver and replace the new slide rail with the same screws.
I had to remove the food off the shelves, then i had to had to remove the shelves. I then took the refrigerator door off. I then removed the bins and removed the broken drawer rails. I then cleaned the area where the bins were. I then installed the new rails and put back the bins. I then reinstalled the refrigerator door and all the shelves. Last was putting all the food back in. Everything went very well.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.