| |
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHenry from San Diego CA
Broken slide rail
Remove two screws holding slide raid in place.
Replace slide rail with new one.
Reinstall two screws.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerginnie from queensbury NY
Rail broke
removed 2 screws and installed new rail with 2 screws 5 min
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerRonald from Reidsville NC
3 of 4 slides were broken
Removed 2 screws on each slide, Screwed in new slide. Done! The hard part was picking the correct part #. Ordered the wrong parts. Parts Select representative helped me get the correct part # and assisted with the return. Thanks.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWendy from Horsham PA
Drawer slide rails broken, couldn't use drawer
Removed old rails & replaced with new ones. Only 4 screws. Very easy. Only problem was picture on website not clear which parts to order. Got wrong part first time, called & they ordered correct part. Arrived very quickly & got return authorization for wrong part.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerArchie from Arlington VA
The veggie drawer fell down from the slide on one side
So I looked at it, and saw the slide had actually broken. Immediately copied the Model Number and put THAT number into the Google Box. Up popped the Part Select site -- along with others. There was a perfectly understandable schematic (interactive.) I figured out what I needed, and ordered the parts. They arrived, and the fix was simple!!!
No $85 service call
No "We'll be there between 8 and 5"
Simple.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDiana from Wells NY
Broken shelf holder
The repair took 5 minutes remove old screws wash well and screw in the two screws into new holder. Very simple all you need is a phillips screwdriver.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRobert from Palm City FL
Broken slide rail
Very easy- just remove 2 screws and re-install using same screws and existing holes.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerWayne from Riverside CA
Storage drawers slides were broken
First I removed all the broken pieces with a screwdriver. I then installed the upper drawer slides and then the lower. Put the glass in was easy. All you had to do was put it in the slots on top of the drawers. The filter of course was unscrew the old one and screw on the new one. All in all is was an easy experience. Too bad it took us over a year to order the parts.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerWinsdale from Bridgeport CT
Broken rail
remove screws insert new rail
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerNoreen from Roswell GA
The slide rail holding the vegetable drawer cracked an dbroke
I removed the 2 screws that had held the cracked drawer slide rail. The new slide rail fit perfectly. I screwed it in using a phillips head screw driver and the drawer slid back in place. Very easy!
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSunni L. from San Bernardino CA
Crisper drawer slide rail broke
I used a short Phillips screwdriver to remove 2 screws that held the broken left slide rail in place. Then I screwed the new part in place. Really, really easy!
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Right Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customerisaac from Bellevue WA
Old one broke when I put too much weight on the bottom shelf and the top drawer as this bracket supports both. Bad design.
Unscrew the two screws with a screwdriver and replace the new slide rail with the same screws.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsScrew drivers, Socket set
Customersteven from windsor mill MD
Slide rails were broken
I had to remove the food off the shelves, then i had to had to remove the shelves. I then took the refrigerator door off. I then removed the bins and removed the broken drawer rails. I then cleaned the area where the bins were. I then installed the new rails and put back the bins. I then reinstalled the refrigerator door and all the shelves. Last was putting all the food back in. Everything went very well.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerREBECCA from SEMMES AL
Slide rails for drawer broke
1st I unscrewed the side rails after I removed the drawer. I saved the screws and both rails until I received the new ones.There were 2 screws in each side. 2nd I looked online at the parts select web page. The exploded diagrams were extreemly helpful. Like most people my appliance book does not have this feature. I ordered the 2 rails for the drawer on Sunday morning and the parts were here by Wednesday afternoon..very good service in my opinion. I then proceeded to replace the two side rails with the screws that I saved from dismantling them. I then put the drawer back into the refrigerator and it worked perfectly. This repair was easy and it saved me a $60.00+ dollar service call and a longer wait period to get the repair done! I will continue to use part select.com for all my appliance repair work. Thanks
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJennifer from Lumberton TX
Shelf rail was broken from too many heavy items on it
Removed the glass top, and veg drawer. Unscrewed 2 screws holding the broken rail on. Replaced with new rail using old screws. Put the drawer and glass top back on. Done.
The Handle for the Veg drawer just snapped into place. Done.
|