Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306943
When looking inside the fridge, this white drawer slide rail is located on the left side of the refrigerator. Rail ONLY.
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Took the drawer out, unscrewed 2 screws, replaced the part, put the drawer back in.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the screws and replaced the rails one at a time.
removed drawer, unscrewed old slide, screwed on new slide, voila! finished! I was very pleased with PartSelect -- ordering was easy, the correct part came quickly, and packaged very well. All of life should work so smoothly!
used a screw driver to install the new slides for the veggie bins.
Remove the drawer and the shelf glass assembly. using a #2 phillips screwdriver remove the two screws that hold the drawer slide rail. Discard the old slide and place the new slide in position and install the two screws. Be careful not to over-tighten the screws. Place the drawer back on the slide and close it. Next place the front of the glass shelf under the lip on the front of the slide rail and set it in place. Job Complete!
Really easy. I am the type that measures once and cuts twice! But this time even I could do it. The hardest thing for me was locating a phillips head screwdriver in the house. I ordered the correct parts, thanks to the diagram provided, and followed the easy directions. It went exactly as expected.
Simply replaced the 4 screws and slid the drawer back in place. Easy and saved a service call.
So easy - unscrewed old screws, replaced part, put screws back in!The hubby couldn't believe that I finished as quickly as I did...
While only 4 yrs old, an annoying sliding vegetable drawer would tilt to one side and NOT close well at all. After seeing the parts so easily on Parts Select...I had it fixed in under 7 minutes and it is as good as new....you can slide it without frustration
removed two screws which let me take the old part off. I then put the new part on. Shipping was extremely fast.
I removed the drawers, then removed the two screws that held the drawer slide in place. I replaced the drawer slide, secured with two screws, and then replaced the drawers.
I simply took the drawer out took the screws out holdig the two broken slides and put the two new slides back in then the drawer and now the drawer slides in and out easier than it did with the original parts
I removed the damaged parts, reseated the new light shield properly, screwed in the new slide rail, then inserted the chiller drawers to finish.
Part received quickly and was a very good deal!The broken slide rail mounting was held with 2 screws. I removed the plastic shelf on the top and unscrewed the broken part. I replaced it with the new slide rail part and screwed in the 2 screws. I replaced the slide drawer and the top shelf and the job was done...... very easy! Very satisfied!
When the drawer slide rail broke, I thought that I would have to go to Home Depot, find out that they didn't have the part, and have to go through a lot of hassle to get it fixed. I went online and through a Goggle search found Parts Select. It was SO EASY!!!! I typed in my refrigerator's model number and while they didn't have the exact Hotpoint model, they did have model's that were a close match. I picked the model that was closets to mine. The parts page was so easy to figure out. Through the diagram I found my part, you can even click on it and get a larger picture so that you can compare the picture with your actual part. I order what I needed and the parts came right on time. I actually did the repair and not my husband. I was done and everything cleaned up by the time he came down from taking a shower. In fact, the whole repair job and putting the drawer back in took about 5 minutes. I have told all my friends and am recommending Parts Select to them for their repair needs. The next time something breaks, I will go to Parts Select first!!!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.