| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerVadim from Pleasanton CA
The side rails and one of the drawers were cracked.
Ordering was easy and delivery was fast. BUT, the parts I received were not exactly the same as the ones I was replacing, even tough I certainly used my fridge model number when ordering the parts.
As a result the assembly is awkward, one of the rails did not fit and had to be cut half an inch shorter or so (there was some cover on the back of the fridge which prevented the rail from installing).
The rear mounting holes for all four rails also needed to be drilled anew.
The old drawer does not quite match the new rail either.
Overall I am not impressed. But to the partselect credit - the fridge is fairly old, 12 years.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCarie from Falls Church VA
The drawer slide rails wore out (imagine that after 1o years and 5 kids in and out of it everyday!) and we needed to replace them.
Took out the drawer. Removed broken slide rails with screwdriver (two screws each), installed new slide rails with screwdriver, replaced drawer. Voila!
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerAlan from Spartanburg SC
Broken slide rail
Remove the 2 mounting screws, remove broken rail, install new rail and install 2 screws. I was finished in about 2 minutes.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoel from Melville NY
Slide rail cracked and fruit drawer wouldn't slide open
Trust me when I say that I am not a very handy person. It took only a matter of seconds to remove the broken slide rail, took 2 screws out. I found the part easily on the website, placed the order and the part was in my house in 2 days. My 12 year old son and I replaced the slide rail in a matter of seconds-required only the same 2 screws to secure in place. We replaced the glass shelf, slid the draw into place and now it is as good as new! A very easy repair!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMike from memphis TN
Broken drawer slides
remove two screws and replace with new drawer slides a very simple task,eight screws later and all four slides were repaced
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyDifficult
Time to do repair:1- 2 hours
ToolsScrew drivers, Socket set
CustomerRobert from Bowling Green KY
Faulty ice maker
ordered the replacement ice maker. what I received was not an exact fit appication. I had to alter the screw holes for the mounting brackets. I had to use an extension cable (provided) to connect the the fridge. The point where the two cables were connected resulted in a cable that was not only unflexible but too long and I had to alter the ice maker unit to make the cable fit. I am still not completely happy due to the ice maker inconsistancey. Sometimes we have ice sometimes not. In fact, I had to take the whole unit out again today because tow cubes became lodged in the tray and would not allow the tray to fill which resulted in no ice for quite sometime. So, right now I am not too thrilled with the replacement part I received.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLane from Pittsville WI
Broken slide rails - drawers kept falling out
Removed the two screws that held each rail in place, cleaned fridge well underneath them, put new rails on with the two screws each. Simple repair, perfect fit parts, beautiful results - looks like new.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerMona from Havelock NC
Drawer slides were broken
First I removed the two screws that hold the drawer slide in place. I cleaned the area where the old slide had been. I then put the new slide in place and put in the two screws I had from the old slide. I did this for all three slides I received.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRae from Gambrills MD
The drawer track on my refrigerator broke, so we ordered the part and now the drawer is in place again.
Removed broken track by unscrewing it and screwed in new track
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
Customerdan from Holden MA
Drawer slide rails worn out
The new slides were slightly different than the original slides. The slides fit, but the glide inserts on the slides interfered with the drawer. I had to remove the glide inserts, and modify them. Now the drawer slides properly.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerDavid from Fairfield CT
Both plastic rails on left side broken
Both the rails on the left side of both vegetable draws were broken for months; I ordered another part for the refrigerator about a year ago and saved the web site. I looked up the parts found them very quickly and ordered them they came in two days and it took me three minutes to install them other than the cost it could not have been easier.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerEVA from OSSINING NY
Broken rails
EASY REMOVAL WITH SCREWDRIVER;TRO UBLESHOT CAUSAL EFFECT OF [ METAL]
SCREW AGAINST {PLASTIC] RAIL WHICH CAUSED BREAK. MY SOLUTION;TOOK BIKE INNER-TUBE, SISSOR-CUT AND FASHIONED SMALL 'GASKET' WASHERS TO SOFTEN CONTACT POINTS ON BOTH INNER & OUTER SIDES OF RAILS. TOUCHED UP RUSTY AREA AROUND SCREW-HOLES WITHIN FRIDGE WITH SANDPAPER & RUST-INHIBITING SPRAY PAINT
GOOD TO GO! THANKS FOR THIS OPPORTUNITY
TO SHARE A PREVENTATIVE SOLUTION / UPGRADE!
|
0 of 3 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerHerbert from Baton Rouge LA
Drawer cracked and drawer slide rails broken.
First I remove the damaged drawer and place the new drawer along with the cover gasket. In replacing the left and right drawer slide rail I had to remove the screws to release the broken slide rails. Very simple and easy.
Thank you
HJS
|