306913-1-S-GE-WR72X209          -Drawer Slide Rail - Left Side
306913-1-S-GE-WR72X209          -Drawer Slide Rail - Left Side 306913-2-S-GE-WR72X209          -Drawer Slide Rail - Left Side 306913-3-S-GE-WR72X209          -Drawer Slide Rail - Left Side

Drawer Slide Rail - Left Side

PartSelect Number PS306913

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $12.79
  • You Save

    $2.13
  • Your Price

    $10.66
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Right Side

Part Number 306912

$10.79
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 43 reviews What's this?
31-43 of 43
 

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerAlan from Spartanburg SC

Broken slide rail

Remove the 2 mounting screws, remove broken rail, install new rail and install 2 screws. I was finished in about 2 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

  • Drawer Slide Rail - Left Side

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJoel from Melville NY

Slide rail cracked and fruit drawer wouldn't slide open

Trust me when I say that I am not a very handy person. It took only a matter of seconds to remove the broken slide rail, took 2 screws out. I found the part easily on the website, placed the order and the part was in my house in 2 days. My 12 year old son and I replaced the slide rail in a matter of seconds-required only the same 2 screws to secure in place. We replaced the glass shelf, slid the draw into place and now it is as good as new! A very easy repair!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerMike from memphis TN

Broken drawer slides

remove two screws and replace with new drawer slides a very simple task,eight screws later and all four slides were repaced

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyDifficult

Time to do repair:1- 2 hours

ToolsScrew drivers, Socket set

CustomerRobert from Bowling Green KY

Faulty ice maker

ordered the replacement ice maker. what I received was not an exact fit appication. I had to alter the screw holes for the mounting brackets. I had to use an extension cable (provided) to connect the the fridge. The point where the two cables were connected resulted in a cable that was not only unflexible but too long and I had to alter the ice maker unit to make the cable fit. I am still not completely happy due to the ice maker inconsistancey. Sometimes we have ice sometimes not. In fact, I had to take the whole unit out again today because tow cubes became lodged in the tray and would not allow the tray to fill which resulted in no ice for quite sometime. So, right now I am not too thrilled with the replacement part I received.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLane from Pittsville WI

Broken slide rails - drawers kept falling out

Removed the two screws that held each rail in place, cleaned fridge well underneath them, put new rails on with the two screws each. Simple repair, perfect fit parts, beautiful results - looks like new.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

CustomerMona from Havelock NC

Drawer slides were broken

First I removed the two screws that hold the drawer slide in place. I cleaned the area where the old slide had been. I then put the new slide in place and put in the two screws I had from the old slide. I did this for all three slides I received.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerRae from Gambrills MD

The drawer track on my refrigerator broke, so we ordered the part and now the drawer is in place again.

Removed broken track by unscrewing it and screwed in new track

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

Customerdan from Holden MA

Drawer slide rails worn out

The new slides were slightly different than the original slides. The slides fit, but the glide inserts on the slides interfered with the drawer. I had to remove the glide inserts, and modify them. Now the drawer slides properly.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerDavid from Fairfield CT

Both plastic rails on left side broken

Both the rails on the left side of both vegetable draws were broken for months; I ordered another part for the refrigerator about a year ago and saved the web site. I looked up the parts found them very quickly and ordered them they came in two days and it took me three minutes to install them other than the cost it could not have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJorge from Aventura FL

Rusty and broken plastic parts

It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJames W. from Columbus MS

The crisper bin slides had broken

Removed the bins, and the broken rails. The rails for the upper bin is made for three screws in each rail, and they were installed with only two screws, ehe front and back screws were installed and the middle screw holes had never been drilled for screws. Install the new rails with the front and back screws, then "CAREFULLY" use an electric drill to drill the middle screw holes, and install the middle screws. These screws help relieve the pressure on the front screws when the drawer is pulled out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerEVA from OSSINING NY

Broken rails

EASY REMOVAL WITH SCREWDRIVER;TRO UBLESHOT CAUSAL EFFECT OF [ METAL]
SCREW AGAINST {PLASTIC] RAIL WHICH CAUSED BREAK. MY SOLUTION;TOOK BIKE INNER-TUBE, SISSOR-CUT AND FASHIONED SMALL 'GASKET' WASHERS TO SOFTEN CONTACT POINTS ON BOTH INNER & OUTER SIDES OF RAILS. TOUCHED UP RUSTY AREA AROUND SCREW-HOLES WITHIN FRIDGE WITH SANDPAPER & RUST-INHIBITING SPRAY PAINT
GOOD TO GO! THANKS FOR THIS OPPORTUNITY
TO SHARE A PREVENTATIVE SOLUTION / UPGRADE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 3 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerHerbert from Baton Rouge LA

Drawer cracked and drawer slide rails broken.

First I remove the damaged drawer and place the new drawer along with the cover gasket. In replacing the left and right drawer slide rail I had to remove the screws to release the broken slide rails. Very simple and easy.


Thank you
HJS

Help other customers find the most helpful instructions.

Were these instructions helpful?

31-43 of 43