Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306913
This part works with the following brands: GE, Hotpoint & Kenmore.
Removed broken slide rails (2 screws per rail) and replaced new rail. Easy as drinking my morning coffee.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I removed the top shelf and removed broken rail and instaled new rail only two screws .
Removed the screws holding old rails on, replaced with new rails - using opposite side to gain an understanding of the small plastic pieces and how they were to be placed. there were on directions with the parts. The age of the refridgerator contributed to the need to thourally wash the area's behind the rails - what a pain to get gunk off. the area is small and is somewhat tight to get into. the Parts came remarkably quick and that was a great surprise- thanks
Removed 4 phillips screws from old drawer glides (keep the screws). Placed new drawer glides in place with 4 phillips screws. REALLY EASY. Also replaced the drawer cover gaskets, take off, put on by hand. Like a new fridge!
Ordering was easy and delivery was fast. BUT, the parts I received were not exactly the same as the ones I was replacing, even tough I certainly used my fridge model number when ordering the parts.As a result the assembly is awkward, one of the rails did not fit and had to be cut half an inch shorter or so (there was some cover on the back of the fridge which prevented the rail from installing).The rear mounting holes for all four rails also needed to be drilled anew.The old drawer does not quite match the new rail either.Overall I am not impressed. But to the partselect credit - the fridge is fairly old, 12 years.
First I removed 2 screws on each slide, removed the broken slide, replaced each slide with 2 screws. Done.
Removed old worn out slide rails and replaced them with newer ones.
I removed the broken parts and replaced them with the new parts. It was a very easy job.
removed broken rail and replaced two screws and the job was complete...took longer to clean the botom of the refrigerator than replace the part
It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.
Replace brackets and performed a long overdue fridge cleaning
Simply used screwdriver to take off broken rails and replaced with them new ones we received.
nothing to it
Since I ordered the right part thanks to the website, installing was easy. I just put the part in place and screwed the two screws into place. It took less than 2 minutes.
Had to unscrew the slide rails from both sides of refrigerator and insert the new slide rails. When the baskets were inserted and slid with ease I knew I had installed them properly
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.