306911-1-M-GE-WR72X207-Drawer-Slide-Rail-Left-Side.jpg
306911-1-S-GE-WR72X207-Drawer-Slide-Rail-Left-Side.jpg 306911-2-S-GE-WR72X207-Drawer-Slide-Rail-Left-Side.jpg 306911-3-S-GE-WR72X207-Drawer-Slide-Rail-Left-Side.jpg

Drawer Slide Rail - Left Side

PartSelect Number PS306911

This drawer track supports the left hand side of the sliding drawer.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $27.54
  • You Save

    $4.59
  • Your Price

    $22.95
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Videos For installing this part.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Drawer Slide Rail - Right Side

Part Number 306910

This drawer track supports the right hand side of the sliding drawer.

$22.96
In Stock

Drawer Slide Rail - Right Side

Part Number 306910

This drawer track supports the right hand side of the sliding drawer.

$22.96
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.5 / 5.0, 48 reviews What's this?
46-48 of 48
 

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerScott from Salisbury MD

The slide rails had broken over the years through normal wear and tear. The drawers would not track properly or at all.

It was a simple matter to just unscrew the remaining pieces of the old slides and then screw in the new parts. Because I had waited until several needed replacing, it was important to make sure I had the right part for the right side and the right drawer.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:15 - 30 mins

ToolsScrew drivers

Customertodd from morro bay CA

Broken cooler shelves in my refridgerator.

My Hotpoint fridge did not have working cooler shelves due to years of service. I was able to remove the slide drawer rails, install the new rails, and replace the drawers. It works great! PS: Clean the fridge first to make the job easier and to make a wonderful presentation when you show your hard work to your wife!!!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerEVA from OSSINING NY

Broken rails

EASY REMOVAL WITH SCREWDRIVER;TRO UBLESHOT CAUSAL EFFECT OF [ METAL]
SCREW AGAINST {PLASTIC] RAIL WHICH CAUSED BREAK. MY SOLUTION;TOOK BIKE INNER-TUBE, SISSOR-CUT AND FASHIONED SMALL 'GASKET' WASHERS TO SOFTEN CONTACT POINTS ON BOTH INNER & OUTER SIDES OF RAILS. TOUCHED UP RUSTY AREA AROUND SCREW-HOLES WITHIN FRIDGE WITH SANDPAPER & RUST-INHIBITING SPRAY PAINT
GOOD TO GO! THANKS FOR THIS OPPORTUNITY
TO SHARE A PREVENTATIVE SOLUTION / UPGRADE!

Help other customers find the most helpful instructions.

Were these instructions helpful?

46-48 of 48