Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306911
This drawer track supports the left hand side of the sliding drawer.
This part works with the following brands: GE, Hotpoint & Kenmore.
This drawer track supports the right hand side of the sliding drawer.
Replace brackets and performed a long overdue fridge cleaning
Help other customers find the most helpful instructions.
Were these instructions helpful?
Simply used screwdriver to take off broken rails and replaced with them new ones we received.
This is a very simple operation.Part held on by two phillps head screws that are easy to reach once the refridgerator contents were removed from the top of the drawer and the glass and drawer were taken out.3 minutes to take the old one and and put the new one in.It took longer to take out and then replace the contents than replace the slide.
Removed screws and installed new slide.
It was a simple matter to just unscrew the remaining pieces of the old slides and then screw in the new parts. Because I had waited until several needed replacing, it was important to make sure I had the right part for the right side and the right drawer.
Had to unscrew the slide rails from both sides of refrigerator and insert the new slide rails. When the baskets were inserted and slid with ease I knew I had installed them properly
Remove and replaced. It is companies like PartSelect that make the internet worthwhile. The part arrived in 3 days and fit perfectly.
I ordered the part on Friday afternoon and it was delivered on Saturday morning. I removed two screws took off the old piece and screwed in the new piece in about 5 minutes.
remove two screws and replace with new drawer slides a very simple task,eight screws later and all four slides were repaced
Removed the two existing screws and removed the broken drawer slide. Screwed the new, exact duplicate back into place. Less than five minutes to eliminate the six months of hassle I've put up with having the broken slide. So easy I'm embassed to even brag about fixing something.
First I removed 2 screws that hold the slider, then replaced the slider and replaced the screws.
Removed the two screws that held each rail in place, cleaned fridge well underneath them, put new rails on with the two screws each. Simple repair, perfect fit parts, beautiful results - looks like new.
removed broken shelf two screws - replaced with new shelf two screws
First I removed the two screws that hold the drawer slide in place. I cleaned the area where the old slide had been. I then put the new slide in place and put in the two screws I had from the old slide. I did this for all three slides I received.
Removed two screws on each slide rail and used the same two screws to install new rails. The job took only a few minutes. The best part was the promptness of the delivery. I ordered the parts at 12P on Thurs and had them on my porch at 10A on Fri. Thanks Gary
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.