| |
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerCindy from Manhattan KS
Broken slide rails
Removed broken slide rails (2 screws per rail) and replaced new rail. Easy as drinking my morning coffee.
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerTrevor from Columbus OH
Broken rail
After fixing my washer this was a snap. After lifting out drawer and shelf only two screws needed removal. I think it was easier putting it back together! It is sites like these that make it possible for men to feel like men!
|
1 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsNutdriver
CustomerCraig from Charlotte NC
Drawer would not slide in and out as designed.
I removed the screws holding the remaining portion of the slide rail in place. I was able to install the new rail by simply attaching the part to the fridge using the same screws. Having an electric screwdriver made the job very easy.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJohn from Marietta GA
Broken drawer rails
Removed the screws holding old rails on, replaced with new rails - using opposite side to gain an understanding of the small plastic pieces and how they were to be placed. there were on directions with the parts. The age of the refridgerator contributed to the need to thourally wash the area's behind the rails - what a pain to get gunk off. the area is small and is somewhat tight to get into. the Parts came remarkably quick and that was a great surprise- thanks
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerCynthia from Yakima WA
Broken drawer guides in rental refridgerator
Piece of cake, unscrewed two screws on each drawer guide and simply relaced the new sides. Fit was perfect and fridge is like new again.
|
2 of 4 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerJoanne from West Columbia SC
Needed left and right drawer rails for crisper
I was so pleased to find your website. We have just one company here in Columbia,S.C. that sells refrigerator parts. I did find out that they wanted about $60.00 for both pieces. Needless to say,I was just going to do without. I knew there had to be someone else. I found you guys on line,ordered my parts for a little over $5.00 a piece,and I put them in myself. I'm talking standard GE parts,not knockoffs. I am so pleased. Thanks for being there. I tell everyone about you.
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRamona from Woodbridge VA
The left side glides broke on meat and veggie drawer
Removed 4 phillips screws from old drawer glides (keep the screws). Placed new drawer glides in place with 4 phillips screws. REALLY EASY. Also replaced the drawer cover gaskets, take off, put on by hand. Like a new fridge!
|
1 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerLinnea from SAlisbury NC
Slides on 2 drawers were broken
First I removed 2 screws on each slide, removed the broken slide, replaced each slide with 2 screws. Done.
|
1 of 2 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerRalph from Pagosa Springs CO
Broken drawer slide rail
I unscrewed the broken slide rail and screwed in the new one. Voila!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerSamuel from Ashaway RI
Slides and shield cracked/22 yrs old???
too simple to explain---unscrew 4 screws-screw in 4 screws!!!shield snaps in.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerBarry from Ashland VA
The side rail which the vegitable drawer slides on and the top glass rests was broken form too much weight.
Repair was very simple. Removed the glass and drawer. Unscrewed the two screws holding the rail on. Put the new rail on with the same screws. Replace the glass and drawer. What was really cool was pluging the modle number into Google and your site was one of the top three. The brand name was different, but the refrigerator was identical. Must have been sold under more than one brand name.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMary Helen from San Antonio TX
Plastic rail broke
Unscrewed broken rail and screwed in new rail. The best thing was how easy it was to identify the part I needed and the prompt delivery of the part once I ordered it. Thank you very much. I was very pleased with your service.
|
0 of 1 people found this instruction helpful
Parts Used
-
- Drawer Slide Rail - Left Side
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customernthony from Overland Park KS
Drawer slide broke
Just replaced the drawer slide. The thing that amazed me was the speed I received the part, I ordered it on Sunday night and it was delivered tuesday afternoon, great job.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJorge from Aventura FL
Rusty and broken plastic parts
It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerSTEVE from DANDRIDGE TN
Broken brackets
REPLACE BRACKETS AND PERFORMED A LONG OVERDUE FRIDGE CLEANING
|