Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306910
This drawer track supports the right hand side of the sliding drawer.
This part works with the following brands: GE, Hotpoint & Kenmore.
This drawer track supports the left hand side of the sliding drawer.
Piece of cake, unscrewed two screws on each drawer guide and simply relaced the new sides. Fit was perfect and fridge is like new again.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Ordering was easy and delivery was fast. BUT, the parts I received were not exactly the same as the ones I was replacing, even tough I certainly used my fridge model number when ordering the parts.As a result the assembly is awkward, one of the rails did not fit and had to be cut half an inch shorter or so (there was some cover on the back of the fridge which prevented the rail from installing).The rear mounting holes for all four rails also needed to be drilled anew.The old drawer does not quite match the new rail either.Overall I am not impressed. But to the partselect credit - the fridge is fairly old, 12 years.
too simple to explain---unscrew 4 screws-screw in 4 screws!!!shield snaps in.
Easily unscrewed the old rails and installed new ones. Took me less than 10 minutes and it's like I have a new refrigerator. Great.
I removed the broken parts and replaced them with the new parts. It was a very easy job.
Removed drawer and 2 shelves/Screwed in new rail.
Simply unscrewed the broken slide rail and reinstalled the new one. I called a local appliance repair and they never followed through on my request for help so I ordered the part through PartSelect. It was quick and easy. I got the correct part within a week.
It was just a matter of replacing the broken parts, and reassembling the ice machine. Nothing too difficult.
Simply used screwdriver to take off broken rails and replaced with them new ones we received.
The parts arrived in one day and I did not order them express. I pulled the two drawers out undid the four screws pulled the old pieces out held the new rails up put in the four screws put the drawers back in and I was done the wife said if it was that easy why did you not do this three years ago. It was the easiest repair I have ever done. Thank you for the fast service.Greg
this repair was very simple and very easy....I took out the drawers and removed 2 scrwes on each slide, and the broken ones came right off. I put the new ones on by puting the 2 screws back in place..done....VERY simple...Thanks,,,,
Looked at the broken part. Thought, "Oh darn. I don't want to pay a repairman to do that simple thing. I wonder if I can get a part on the internet?" Looked and found your site. It was easy to use. It told me everything I needed to do, even where to find the model number. Simple! I easily found the part number on your site and ordered. Part came a couple of days later. I undid the old screws---2 of them. Cleaned the area behind the old rail. Screwed in the new rail with the same 2 screws, and voilà, all fixed.
It was a simple matter to just unscrew the remaining pieces of the old slides and then screw in the new parts. Because I had waited until several needed replacing, it was important to make sure I had the right part for the right side and the right drawer.
Remove the broken rail and replace. Use the same screw to attach the new one. The new rail does not come with any screw. So make sure to keep the old screws. When ordering, mcheck the diagram properly so that you won't get the wrong side rail.
Had to unscrew the slide rails from both sides of refrigerator and insert the new slide rails. When the baskets were inserted and slid with ease I knew I had installed them properly
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.