| |
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerEDDIE from WINSTON-SALEM NC
Door slide rails broken
Removed old worn out slide rails and replaced them with newer ones.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyA Bit Difficult
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJames W. from Columbus MS
The crisper bin slides had broken
Removed the bins, and the broken rails. The rails for the upper bin is made for three screws in each rail, and they were installed with only two screws, ehe front and back screws were installed and the middle screw holes had never been drilled for screws. Install the new rails with the front and back screws, then "CAREFULLY" use an electric drill to drill the middle screw holes, and install the middle screws. These screws help relieve the pressure on the front screws when the drawer is pulled out.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerLewis from Salt Lake City UT
The rails holding the vegetable drawer were broken
It was a trivial repair job -- just removed the Philips-head screws holding in the broken rails, and screwed in the new ones. (I also took the opportunity to scrub the bottom walls and floor of the fridge.) I'm just glad that PartSelect had the parts available, and that it was so easy to locate them!
|
2 of 9 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
Customersteve from penngrove CA
Switches knobs and igniter replaced
Very easy, I just hope appliance has more life in it to justify repairing it.
|