Pan Slide - Left Side

PartSelect Number PS306899

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $15.13
  • You Save

    $2.52
  • Your Price

    $12.61
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Pan Slide - Right Side

Part Number 306898

$11.11
No Longer Available

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.2 / 5.0, 4 reviews What's this?
1-4 of 4
 

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerEDDIE from WINSTON-SALEM NC

Door slide rails broken

Removed old worn out slide rails and replaced them with newer ones.

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 1 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerLewis from Salt Lake City UT

The rails holding the vegetable drawer were broken

It was a trivial repair job -- just removed the Philips-head screws holding in the broken rails, and screwed in the new ones. (I also took the opportunity to scrub the bottom walls and floor of the fridge.) I'm just glad that PartSelect had the parts available, and that it was so easy to locate them!

Help other customers find the most helpful instructions.

Were these instructions helpful?

0 of 2 people found this instruction helpful

Parts Used

Level of DifficultyA Bit Difficult

Time to do repair:30 - 60 mins

ToolsScrew drivers

CustomerJames W. from Columbus MS

The crisper bin slides had broken

Removed the bins, and the broken rails. The rails for the upper bin is made for three screws in each rail, and they were installed with only two screws, ehe front and back screws were installed and the middle screw holes had never been drilled for screws. Install the new rails with the front and back screws, then "CAREFULLY" use an electric drill to drill the middle screw holes, and install the middle screws. These screws help relieve the pressure on the front screws when the drawer is pulled out.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 12 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

Customersteve from penngrove CA

Switches knobs and igniter replaced

Very easy, I just hope appliance has more life in it to justify repairing it.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4