Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306735
This part works with the following brands: GE, Hotpoint & Kenmore.
This drawer track supports the right hand side of the sliding drawer.
Empty veggy drawer. And slide out top glass shelf of drawer. Using philips screwdriver, remove (2) screws that hold rail to side wall of fridge. Replace with new slide . Slide glass shelf back in and then veggy drawer. 15 - 20 Minutes tops to fix. Tell wife if drawer doesent shut don't force it closed! (Overload it)
Help other customers find the most helpful instructions.
Were these instructions helpful?
Unscrewed old ones, screwed in new ones. Really simple and fast. Took awhile to decide which rails to buy at first, but pictures online really helped.
I took the glass plate off the top of the drawer, then removed the draw. I then removed the two screws holding the slide rail. I put the new slide rail in place, put the screws back in it, slide the drawer back in place and replaced the glass top. nothing to it.
installed 3 of 4 shipped parts. ended up with 2 upper right hand slide rails, even though ones package said upper left.
First I removed the drawers. Then I removed the 2 screws from each side. Then replaced the 2 pieces in the same manner using the same screws. It took about 15-20 min. Very easy. Drawers work perfectly now. Glad I found this site.
Removed 2 screws replaced new part very easy
I removed the drawer and glass shelf, removed 2 screws and replaced with new drawer slide in reverse order. I removed the contents of the door, the top hinge, and then laid the door down. On the bottom of the door, I replaced the pivot piece (provided) and then I replaced the hinge on the lower right side of the refrigerator box (2 screws with a nut driver bit). I now reversed the order to re-assemble the door and finally re-aligned the top hinge to adjust the door fit. Less than 30 minutes total. EASY!
Really easy to replace
Removed the broken ones with screwdriver.Easiest job ever!
Removed old part & screwed in new rail.I would like to mention that the speed in which my order was sent was fantastic & your website was really easy to use. Which not being a very savvy computer person is a real compliment!! A pleasure doing business with you. I would highly recommend your company.
Emptied glass shelf, removed , removed old rail. Put new rail in with original screws ,then glass shelf. Done
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.