Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS306734
This drawer track supports the right hand side of the sliding drawer.
This part works with the following brands: GE, Hotpoint & Kenmore.
Unscrewed old ones, screwed in new ones. Really simple and fast. Took awhile to decide which rails to buy at first, but pictures online really helped.
Help other customers find the most helpful instructions.
Were these instructions helpful?
I took the glass plate off the top of the drawer, then removed the draw. I then removed the two screws holding the slide rail. I put the new slide rail in place, put the screws back in it, slide the drawer back in place and replaced the glass top. nothing to it.
installed 3 of 4 shipped parts. ended up with 2 upper right hand slide rails, even though ones package said upper left.
First I removed glass shelf on top of rail. I then removed the two screws holding rail to refrigerator side. Next I installed new rail using same two screws. Finally I replaced glass shelf on top of rail.
took 2 philips screws out,took off rail,and then nreverse.these steps,
First I removed the drawers. Then I removed the 2 screws from each side. Then replaced the 2 pieces in the same manner using the same screws. It took about 15-20 min. Very easy. Drawers work perfectly now. Glad I found this site.
Removed two screws holding the broker rail and put in the new one.
Really easy to replace
Removed shelf and vegy bin removed two screws replaced slide rail with new one and replaced the two screws and shelf and vegy. Bin and I was done. Ten mim. Tops
I received the part in only 2 days! Install took 5 min ,great service,speedy delivery,thank you,you have a custumer for life,Frank
All I had to do what unscrew the old railing and screw in the new one. The only problem I had was lining up the hole in the railing with the hole in the fridge wall, then getting the screw into the hole - a bit tricky since the hole was recessed into the railing. But it was still quite easy.
I first pulled the drawers out and unscrewed the broken slide rails from the fridge. I measured, ordered and replaced them with the new ones and slid the drawers back into the fridge. Very simple.
Removed the broken ones with screwdriver.Easiest job ever!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.