Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS304348
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
The water inlet valve is a solenoid-operated switch that, when activated, releases water from the supply line to the water valve and into the compact icemaker mold.
Use this part in conjunction with the dual inlet water valve for your appliance.
To repair the light socket which was not functioning, I identified and followed the instructions on part-select on you tube. I unplugged the refrigerator, cleared away and removed the shelf below the housing for the light. I reached up under the plastic light protector with a screwdriver and popped up the tab on the front holding it in place. Then I easily pulled out the defective socket. I reversed the process and popped the new one in to replace the old, screwed in the light bulb, put the shelf back, plugged the fridge in and was finished. This took only about 5-10 minutes. To repair, and replace the dual inlet-water valve, I pulled the refrigerator out and removed all the nuts protecting the back at the bottom. I unplugged the fridge and turned the water switch at the wall to off. I once again had identified the problem by the symptoms on part-select, ordered the part and watched and followed the repair on part-select on you-tube. There are a variety of nuts and bolts to remove the protective housing and then get to the water inlet valve unit at the back left bottom side. It doesn't take long. I unplugged the two electrical lines holding the water inlet valve in place, I unscrewed the bolt in the center on top and the two valves underneath that are the three water lines from the water in the refrigerator back to the unit and on to the ice maker. I replaced the unit as instructed and started to reconnect the hoses. At that time, I noticed that the hose from the unit to the ice maker was a little brittle at the end. So, I suggest you check all your hoses as well when you identify the same problem. I decided it would be best to replace the hose as well and ordered the ice water hose from part select. I left the water off and put the fridge back. The ice maker hose replacement came quickly, in 2 days. Then I simply pulkled it out and replaced that ice water line in about a minute, reversed putting back the rest of he screws that hols everything in place, closed up the unit, plugged the fridge in, turned on the water valve at the wall and put the refrigerator back in to place. This process, if uninterrupted, would take about 30 -45 minutes. Everything is working good as new now. I probably saved myself at least 150 dollars, had the satisfaction of fixing it and learned something myself about how the whole thing functions. Part select is a find!
Help other customers find the most helpful instructions.
Were these instructions helpful?
Replaced all solenoid valves. Problem solved. Replaced all to prevent future problems with others.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.