Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS299227
This part works with the following brands: GE, Hotpoint & Kenmore.
This fill tube grommet is used on the icemaker.
Disregard previous.1. Turn off water supply.2. Unplug power cord.3. Remove bottom Panel to access the Solenoid valve.4. Remove the water lines from the Valve.5. Remove the Valve from the refrigerator.6. Remove the electrical connectors from the valve.(make sure the new valve has the connector adaptors included) you will need them during installation.7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line.8.Use a pair of pliers to braek away the plastic on the new valve for clearance.9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature.10.Install the bottom 2 water lines they are different sizes11.Mount the new valve to refrigerator and tighten.12.Install the ice maker water line to the top fitting on the valve.13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I shut off water supply and drained line. Then I unplugged power to refrigerator. I then removed the back lower cover from the refrigerator and removed the water supply line from the water valve. I then removed the water valve from the unit then removed the wiring harness from the assembly. Then I cut the plastic lines from the old valve assembly and inserted them in the new valve assembly, one at a time to avoid crossing lines. I reinstalled valve assembly and rear cover on the refrigerator. After turning on the water and plugging in power it took a bit for the air to work itself out of the icemaker supply line.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.