298403-1-S-GE-WR2X7232          -Door Shelf Retainer Bar End Cap
298403-1-S-GE-WR2X7232          -Door Shelf Retainer Bar End Cap 298403-2-S-GE-WR2X7232          -Door Shelf Retainer Bar End Cap 298403-3-S-GE-WR2X7232          -Door Shelf Retainer Bar End Cap

Door Shelf Retainer Bar End Cap

PartSelect Number PS298403

This almond colored door shelf end cap is a little under three inches long.

This part works with the following brands: GE, Hotpoint & Kenmore.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 4 reviews What's this?
1-4 of 4
 

7 of 9 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar End Cap

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerKeith from Cypress TX

Retainer bars on freezer shelf came loose

Replaced end cap, have had to replace them three times since purchasing the refrigator.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar End Cap

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers

CustomerHAROLD from KANNAPOLIS NC

Broken parts

I removed fragments and snapped the replacement parts into place.

The difficulty about these particular parts is that they have to be replaced frequently. The little plastic parts are scandalously expensive for what they are.

Help other customers find the most helpful instructions.

Were these instructions helpful?

3 of 4 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar End Cap

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerHortensia from Miami FL

End cap broken on door shelf

Snapped right in. Couldn't have been easier.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 4 people found this instruction helpful

Parts Used

  • Door Shelf Retainer Bar End Cap

Level of DifficultyEasy

Time to do repair:Less than 15 mins

Tools

CustomerAriane from Mineola NY

End cap for door shelf retainer bar had broken

Used a flat screw driver to push in the small metal piece holding the end cap in place(this was to detach the old broken end cap). Then snapped on the new end cap.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-4 of 4