296743-1-S-GE-WR24X10053        -Freezer Door Gasket
296743-1-S-GE-WR24X10053        -Freezer Door Gasket 296743-2-S-GE-WR24X10053        -Freezer Door Gasket http://www.partselect.com/Schematics/GE/00113269i04.gif

Freezer Door Gasket

PartSelect Number PS296743

This white freezer door gasket is used to seal the freezer door when closed to keep the cool air inside and the room air out.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $113.87
  • You Save

    $18.98
  • Your Price

    $94.89
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 3.1 / 5.0, 2 reviews What's this?
1-2 of 2
 

5 of 10 people found this instruction helpful

Parts Used:
  • Freezer Door Gasket
Level of Difficulty: Easy
Time to do repair: 1- 2 hours
Tools: Nutdriver, Screw drivers
Customer: Greg from Orange, CA

Evaperator continualy iced up causing the unit to not cool effectively

Removed the 28 -5/16" nuts that held the freezer door panel on and the rear panel that covered the evaporator.
once open the evaperator was defrosted (this took some time) and the interior of the freezer door was defrosted as well.
after defrosting, drying and cleaning, the gasket was simply pulled off and the new gasket was installed on the panel then reinstalled on the door (be sure to follow the instructions on the box that the gasket came in for removing any deformaties due to shipping).
Note that due to the age and loosness of the fasting screws I replaced the # 8 screws with new #10 screws.

Help other customers find the most helpful instructions.

Were these instructions helpful?

2 of 5 people found this instruction helpful

Parts Used:
  • Freezer Door Gasket
Level of Difficulty: Easy
Time to do repair: 15 - 30 mins
Tools: Nutdriver
Customer: John from Riverside, CA

Freezerwouldn't freeze

I removed all the screws, removed the cover and carefully removed the old gasket. I began at the top and worked around the door until satisfied that the gasket was firmly in place. Replaced the cover, tightened the screws and viola ! Then I thoroughly cleaned the coils etc in the back of the freezer and I was back in business.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2