Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS295579
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Repair took about 5 seconds. No directions necessary. Super easy.
Help other customers find the most helpful instructions.
Were these instructions helpful?
Part arrived in 2 days and took about 15 seconds to install. Great!! No more broken eggs!!
They don't make appliances like they used to. When my little butter door cracked, we kept using it until it finally fell off for good. So, where do you buy one of these? When I turned to the internet, I found a few places but they were toooo expensive. PartSelect had the right part at the right price. I figured that if I bought another little damaged part, the light cover, at the same time, the shipping cost was essentially halved, an even better deal. I was so surprised when my parts arrived faster than I expected, a couple of days by regular mail. That's faster than I could ever get a service call and who's going to call a repairman for a simple thing like that, anyway. If not for PartSelect my reputation as the Queen of Duct Tape would still be intact. I didn't want duct tape holding together my newish SS fridge in my redone kitchen. Imagine tile, granite, stainless and duct tapeI placed the little door in the fridge and now the butter stays put. the lower light shield is just as easy.
went good everone at partssel was great
The repair would have been simple had the part not come broken two separate times. The return was easy but my problem is not fixed!
Put the new one in--simple!
My wife did it in less than five minutes
For the Main Control board: I took pictures of connectors and matched them to same numbered connectors on the new board, but it's hard to get it wrong, really. Since the old board zapped a hole right through the plastic sheet behind it, I made a new one with the original as a template. For the ice auger, I left the blades on the old, broken one til I was ready to swap them to the new one to keep them in order, and used a new nut though the old one probably would have still worked. The clear crusher cover plate does wiggle on the auger assembly, blades and all. Just be sure to take pictures to remember how it all goes together. The trickiest part is removing the crusher assembly without breaking plastic--only use just enough force to release the claws. You'll have to at least partly take apart the rod pieces underneath. I cleaned everything with warm, dish soap water and some white vinegar mixed in. Some parts I put in the dishwasher. This a good time to clean the entire frig, too. You may want to also have new water line connector hardware on hand, too, just in case it gets damaged/leaks if disconnected and reconnected for servicing. Always unplug the frig first to start. I used a small, indoor/outdoor temperature device to check the freezer and frig temps to check when done to make sure it worked. Finally, it really, really helped having a "loaner" frig during this time!
replaced damaged dairy door with a new one that I ordered from PartSelect
Removed the old dairy door and popped in the new door. Added the new rail, screwed it in and rolled the crisper in place. Real easy job. No instructions needed.
Very simple to take out and put new one in.Very happy that I could still get the part. LOVED how quick it arrived at my door. Packaged well, nothing damaged in shipment.Great system for ordering the part and get service. Thank you.
No tools just opened the box and popped the new part into place...that easy!
I found the part very easily on PartsSelect.com. Ordering was very easy, delivered in less than 3 days. It was very simple to order and replace.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.