Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS295031
This part works with the following brands: GE, Hotpoint & Kenmore.
This part fixes the following symptoms:
Disregard previous.1. Turn off water supply.2. Unplug power cord.3. Remove bottom Panel to access the Solenoid valve.4. Remove the water lines from the Valve.5. Remove the Valve from the refrigerator.6. Remove the electrical connectors from the valve.(make sure the new valve has the connector adaptors included) you will need them during installation.7.Bend the new valve bracket inward about 45 degrees to clear the compressor coolant line.8.Use a pair of pliers to braek away the plastic on the new valve for clearance.9.If needed remove the compression fitings from the old water line installation as the new valve comes with the push and lock feature.10.Install the bottom 2 water lines they are different sizes11.Mount the new valve to refrigerator and tighten.12.Install the ice maker water line to the top fitting on the valve.13.Plug the power cord in & turn on the water supply,check for leaks and proper operation on the valve.
Help other customers find the most helpful instructions.
Were these instructions helpful?
replacing the lines was easy, problem was the drawing on line and the parts list did not show two different size tubing used. had to run out for the 5/16 inche tubing for the water dispenser in the door. got the 1/4 inch tube done in 5 minutes.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.