Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS293381
This part works with the following brands: GE, Hotpoint & Kenmore.
Your customer installation comments were very helpful. After unplugging the unit, I took out all the freezer shelfs and the back panel (4 screws). I hadn't realized the coils were also covered in solid ice. It took awhile to defrost with a hair dryer, and I needed to use more than one towel to soak up the melting ice. Locating and splicing in the new thermostat was very easy. I used "cold weather" electrical tape to splice the wires back together. After reassembling the back panel and shelfs, I snapped in a new light shield that had been broken for awhile. It's been over a week now, and I do not see any problems. Overall, it was a easy fix. Just took a little time to defrost the coils. Sarah
Help other customers find the most helpful instructions.
Were these instructions helpful?
Removed old sheild and reached in freezer replacing sheild with screwdriver. 3 - 4 minutes.Ordered sheild online one afternoon and received the nest afternoon. Great transaction. will use again when needed. George in Louisville, KY
Removed the screws, replaced element, then replaced, shield in freezer, was really simple.
Not done yet.
The repair was straight forward:1. remove all food 2.remove the inside cover over the coils 3. defrost the coils and kill the power 4. remove old heater. 5. reroute wires 6. install new heater 7. assure heater worked by putting frig in defrost cycle 8 Reassemble.
I was amazed the part arrived the next day the installation was simple.
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2016 , Eldis Group Partnership. All rights reserved.