| |
9 of 13 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsNutdriver, Screw drivers
CustomerWilliam from Garden City MI
Warm refrigerator, no door water
Remove the following: lower rails, evap cover, ice maker assembly, attaching hardware for light and evap fan. Follow directions for replacing defrost heater. cut and splice wires for new defrost thermostat, and temperature sensor using adhesive line shrink tube. reassemble. Work like new.
|
4 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerGregory from Fresno CA
Bin and shelf cracked ,upper drawer fell apart
I started with removing all of the old parts.I compared all the new parts with the old.Everything matched up good.While I had it apart I cleaned all of the old parts to be used again.Everything went back together very well.I would have no problem ordering parts again,and doing a repaire.
|
2 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerArthur from Andrews IN
The parts that held up the drawers broke
I removed the screws and the parts fit perfectly. It was an easy repair. The diagrams online helped a lot. I was very very impressed with how soon these parts arrived. It was one day after I ordered them. I would definitely use this service again.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerAnita from Austin TX
Broken plastic pieces of drawer
Pulled out the drawers, removed the broken plastic pieces, did some much-needed cleaning to the fridge, and screwed the new pieces in. By far, the easiest repair I've ever done!
|
1 of 3 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJames from Naples FL
Broken rails and trim pan bar
I removed the broken parts by taking out the screws that held them in place. I then screwed the new parts back in. Everything fit perfectly and the parts I ordered arrived in one day.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerGary from Lake Worth FL
2 verticle and 4 horizontal drawer brackets a broke
Removed(unscrewed) broken parts and replaced with new parts.
I suggest parts be marked left or right
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMichelle from Delta CO
The bracket that holds the drawers broke
This was super easy to repair. It was really easy to look up the correct part on line with the diagrams provided. We got it right the first time and with in 7 days from the time it was broken it was fixed. It only took 5 minutes to repair.
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMichael from Crofton MD
Old parts broken and or cracked so drawers didn't open easily and shelves were uneven
First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer.
The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerVaughn from Aurora CO
Broken drawer slides
This was a very easy repair. I simply removed the screws that held the drawer slide rails and trim pans, and replaced the broken parts. No sweat!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJ. Douglas from Grass Valley CA
Broken plastic parts
Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers.
|