| |
16 of 19 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerAnthony from Ludlow VT
Broken plastic slide rails for drawers and trim piece.
Unscrewed the old and screwed in the new. Parts were perfect and were original brand, no knock off stuff. Good deal...
|
4 of 7 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerGregory from Fresno CA
Bin and shelf cracked ,upper drawer fell apart
I started with removing all of the old parts.I compared all the new parts with the old.Everything matched up good.While I had it apart I cleaned all of the old parts to be used again.Everything went back together very well.I would have no problem ordering parts again,and doing a repaire.
|
1 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerPatrick from Northridge CA
Remove and replace drawer slide and trim peice
I first removed the bottom drawer and the glass shelf. That is probably what took the longest time. From there I removed the screws in the drawer slide and trim peice and discarded the broken peices. I then just reversed the process with the new parts. DONE! Considering how I type, this description probably took longer than the job. The most helpful part of the whole episode was the detailed illustrations provided by PartSelect, The parts were easy to identify, purchase and receive. Thanks again,
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:1- 2 hours
ToolsScrew drivers
CustomerGary from Lake Worth FL
2 verticle and 4 horizontal drawer brackets a broke
Removed(unscrewed) broken parts and replaced with new parts.
I suggest parts be marked left or right
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerMichael from Crofton MD
Old parts broken and or cracked so drawers didn't open easily and shelves were uneven
First I removed the drawers and shelves. Then I removed the left and right trim pans (1 screw ea). Next I removed the two screws (8 total) for each of the left and right drawer slide rails and rail assemblies. Then I spent way too much time cleaning the bottom half of my refrigerator, the shelves and drawers! After finishing the cleaning, I installed the lower left and ride slide rails (2 screws ea). Then I installed the upper left and right slide rails (2 screws ea). I then installed the left and right trim pans (1 screw ea). After that I set the bottom shelf and drawer in and then did the upper shelf and drawer.
The packaging was OEM, clearly marked too. The hardest part of the job was cleaning my refrigerator!
|
0 of 1 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:15 - 30 mins
ToolsScrew drivers
CustomerVaughn from Aurora CO
Broken drawer slides
This was a very easy repair. I simply removed the screws that held the drawer slide rails and trim pans, and replaced the broken parts. No sweat!
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyEasy
Time to do repair:30 - 60 mins
ToolsScrew drivers
CustomerJ. Douglas from Grass Valley CA
Broken plastic parts
Cleaned the refrigerator as the old parts were removed. Installed new parts as the old parts were removed so as to easily identify the replacement parts. Very easy and wife was extremely happy after old plastic parts self destructed over a period of months and refrigerator was essentially unusable on the bottom two drawers.
|
0 of 2 people found this instruction helpful
Parts Used
Level of DifficultyReally easy
Time to do repair:Less than 15 mins
ToolsScrew drivers
CustomerNancy from Tucson AZ
Broken slide rail and trim
Removed the old parts and installed the new - very quick and easy - less than 15 minutes.
Parts Select is great!
|