290656-2-S-GE-WR13X746          -Bottom Hinge Pin and Cam Assembly
290656-2-S-GE-WR13X746          -Bottom Hinge Pin and Cam Assembly 290656-1-S-GE-WR13X746          -Bottom Hinge Pin and Cam Assembly 290656-3-S-GE-WR13X746          -Bottom Hinge Pin and Cam Assembly

Bottom Hinge Pin and Cam Assembly

PartSelect Number PS290656

This assembly comes with the bottom hinge pin and cam.

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $33.06
  • You Save

    $5.51
  • Your Price

    $27.55
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Related Parts Additional or alternate parts to consider.

Part PhotoPart DescriptionPriceAvailability

Bottom Door Hinge and Cam Assembly

Part Number 290655

May differ in appearance, but functions same as original part.

$17.47
In Stock

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.0 / 5.0, 2 reviews What's this?
1-2 of 2
 

6 of 9 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers, Socket set

CustomerRalph from Pagosa Springs CO

Door wouldn't stay closed; fridge alarm went off constantly

I removed the door from the fridge by taking off the screws that held the top plate on. I then removed the old broken cam from the door and the old hinge pin on the fridge and replaced them with new parts. I then put the door back on, screwed the top plate of the door into the top of the fridge, and with a few minor alignment adjustments with the freezer door, I was done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

5 of 7 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:30 - 60 mins

ToolsSocket set

CustomerEdson from Houston TX

Fresh food door stop and hinge cam riser broke

I needed to replace the door hinge, the cam riser and the door stop. The first step was to jack up the door so the hinge could be replaced. After that it was just a matter of unscrewing the 2 screws holding the hinge and the two screws holding the door stop. Reassembly was easy after the cam riser was placed on the door hinge pin and the 4 screws reattached.

I did not need the door hinge shim and it has been returned for credit.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2