288341-1-S-GE-WR11X10010        -Freezer Lever - Black
288341-1-S-GE-WR11X10010        -Freezer Lever - Black 288341-2-S-GE-WR11X10010        -Freezer Lever - Black 288341-3-S-GE-WR11X10010        -Freezer Lever - Black

Freezer Lever - Black

PartSelect Number PS288341

This part works with the following brands: GE, Hotpoint & Kenmore.

  • Compare At

    $14.10
  • You Save

    $2.35
  • Your Price

    $11.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.8 / 5.0, 2 reviews What's this?
1-2 of 2
 

9 of 11 people found this instruction helpful

Parts Used

  • Freezer Lever - Black

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerJames from Jacksonville FL

Freezer door lever broke

Unscrew the two mounting screws for the plastic vent plate on the bottom of the SS unit and take the remove the vent. Next, slide the end of the lever through the square hole in the bottom bracket and attach the hook end of the lever to one end of the lever spring. Pull on the other end of the lever spring and slip it over the spring mount finger that is a part of the bottom bracket frame. Finally,reattach the plastic vent plate with the 2 mounting screws. Total repair time was less than 15 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

7 of 9 people found this instruction helpful

Parts Used

  • Freezer Lever - Black

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerLarry from Columbia CA

Feezer door would not always seal

Because the lever was broken, when you close the refrigerator door, the freezer door would unseal slightly causing frost to build up on the inside and outside of the door.

After removing the base grille, the repair was made by simply placing the new part in the slot where the old part was then re-attaching the spring from the part to the hook in the base of the refrigerator. Now replace the base grille with the two screws. Time: About 10 minutes. Tools: Phillips screwdriver, needle nose pliers.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-2 of 2