Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
Sort by:
< Prev
1
Next >
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Leandro
April 3, 2019
Tengo un refrigerador GE gsl25jftc bs y no arranca el compresor ni el fan, tampoco el control de dispensador, solo las luces interna de refrigerador. Que me sugieren sea el defecto que está presentando mi refrigerador??
i have a GE gsl25jftc bs refrigerator and it does not start the compressor or the fan, nor the dispenser control, only the internal refrigerator lights. what do you suggest is the defect that is presenting my refrigerator?
For model number GSL25JFTCBS
Hello Leandro, Thank you for the question. This sounds like an issue with the Electronic Board that controls the operations of the appliance. PartSelect Number PS12069099. Thank you for your inquiry, good luck with this repair!
Was this helpful?
Thank you for voting!
Leandro
April 8, 2019
My is making ice water in the dispenser hose, so the water does not flow, also freezes the vegetables and fruits that are in the drawer below the refrigerator, what can be problems ?? thank you
For model number GSL25JFTCBS
Hi Leandro, thank you for your question. You may want to check your water inlet valve for being the issue first. It could be that it is not closing all the way and water is getting through your tube up to your freezer and freezing. The build up would block the tube after a while. When you are having temperature problems in your fridge, there are a few parts that could cause the issue. You can use a multi meter to test most of the parts. Make sure you cut power to your appliance before doing any repairs or tests. First you should test your defrost thermostat. Place the thermostat in ice cold water for 2-3 minutes after removing it from your appliance. It should be reading 0 ohms to be working correctly. Another part to check would be your defrost heater. Remove it from the appliance. It should be reading anywhere between 0 - 50 ohms to be working. You could check your temperature sensor. To find the correct reading for this part you will have to refer to your tech sheet that comes with your appliance. You can usually find this tech sheet behind the bottom grille of your fridge on either the right or left side. These are the most common parts that cause this issue in your appliance. So it is suggested you check them first. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
