Have you ever purchased from PartSelect.com before?
Thank you for helping make our site better.
PartSelect Number PS273912
This part works with the following brands: GE, Hotpoint & Kenmore.
First opened top cover using a putty knife to release the spring load catches in front.Second, removed the old splash guard by carefully prying the retainer wire off the flange of the washing machine top. The retaining wire needs to be reused.Third, put the retaining wire on the splash guard and worked it on to the washing maching top flange using a screwdrive to pry it over the lip a little bit at a time.It is important to place the splash guard on the locating pin so that the spout for water recirculation will fit through the hole in the splash guard.
Help other customers find the most helpful instructions.
Were these instructions helpful?
First I moved the washing machine out from wall. I then took a flat head screwdriver to pryed up the top to gain access to the shield cover. I then pulled of the retaineing wire clamp. Cleaned up all surfaces for preperation of new shield. Installed new shield cover and closed top of macine!!
All brand logos are trademarks of their respective owners.
The PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.
Copyright © 1999-2017 , Eldis Group Partnership. All rights reserved.