271609-1-S-GE-WH2X650           -Compression Ring
271609-1-S-GE-WH2X650           -Compression Ring 271609-2-S-GE-WH2X650           -Compression Ring

Compression Ring

PartSelect Number PS271609

This compression ring works in conjunction with the timer dial.

This part works with the following brands: GE, Hotpoint & Kenmore.

This part fixes the following symptoms:

  • Timer will not advance.
  • Will not start.
  • Compare At

    $11.70
  • You Save

    $1.95
  • Your Price

    $9.75
In Stock
Fast Shipping Get this part fast. Average delivery time via regular ground: 1.8 days.

Installation Instructions Provided by PartSelect customers like you.

Average Repair Rating: 4.9 / 5.0, 5 reviews What's this?
1-5 of 5
 

79 of 96 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerMr Dennis from Twinsburg OH

Knob would not engage, had to manually turn outer ring to start washer.

Used a screw driver and needle nose pliers to remove clip from behind the timer knob. Took 2 minutes to remove clip, i admit it was a little tricky but once you get a grip on the clip very easily removed. Replaced with new knob, old knob gear was completley stripped . put the new clip on and presto, Like brand new.A normal service call would of ran me 45.00 just to tell me what was wrong with the machine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

21 of 28 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerGordon from BLUE DIAMOND NV

Timer knob broke off where the dial compression ring fits.

All I had to do was pull out the broken timer dial assembly and push in the new one.

Help other customers find the most helpful instructions.

Were these instructions helpful?

17 of 19 people found this instruction helpful

Parts Used

Level of DifficultyEasy

Time to do repair:Less than 15 mins

ToolsScrew drivers

CustomerClifford from Sun Valley NV

Teeth on timer knob broke off

Removed timer knob clip and installed new dial and timer knob

Help other customers find the most helpful instructions.

Were these instructions helpful?

8 of 11 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

ToolsPliers, Screw drivers

CustomerDennis from Middletown RI

Wash cycle selection knob had plastic teeth on the underside that stripped out with years of use.

I used a pair of needle nose pliers and a screw drive to remove the clip holding the knob on its shaft. The new knob came with its clip already in place, so it "popped" right on. I ordered the compression ring in error and it it was not needed

Help other customers find the most helpful instructions.

Were these instructions helpful?

1 of 5 people found this instruction helpful

Parts Used

Level of DifficultyReally easy

Time to do repair:Less than 15 mins

Tools

CustomerJAMES from Boca Raton FL

Timer knob defective

After viewing the brief video supplied by you,it was a simple five minute fix.

Help other customers find the most helpful instructions.

Were these instructions helpful?

1-5 of 5